Like any other vehicle, Clark lift trucks require regular maintenance to keep them running safely and efficiently. And one of the most critical systems to maintain is the brake system. Over time, major Clark forklift brake parts can become worn or damaged, reducing their effectiveness. If they're not properly repaired or replaced, it can lead to severe working accidents. That's why it's helpful to have high-quality Clark forklift brake parts on hand to change them before it's too late. That's why at Lift Parts Warehouse, we want to expand a little more about the importance of these parts and what to consider when purchasing their replacements.
New Clark Forklift Brake Parts To Keep You Going
Clark forklift Brake Parts
Brake Drums. Clark forklift brake drums are round objects located inside Clark lift truck wheels. When the lift truck driver pushes on the brake pedal, it sends a hydraulic signal to a wheel cylinder, making the brake shoe push out against the inside of the brake drum.
Emergency Brake Handles. Clark forklift emergency brake handles, also known as Clark forklift parking brakes, are an important safety feature and should always be used when parked on an incline or anywhere the lift truck could potentially roll. It is a mechanical device that works by applying friction to the wheels of your car. When you engage the parking brake, a lever engages a ratchet that locks the brakes into place.
Brake Shoes. Clark forklift brake shoes are curved pieces of metal with friction material on one side. When you push the brake pedal, the brake shoes push out against the brake drum to create friction and slow down your lift truck.
Master Cylinders. Clark forklift brake master cylinders help turn the pressure on the brake pedal into hydraulic pressure. This makes it so the brake fluid can go into the brake circuit and be controlled according to how much force you use.
Wheel Cylinders. Clark forklift wheel cylinders receive the hydraulic pressure signal when the brake lift truck pedal is pressed. This pressure makes the brake shoes separate and press against the brake drum.
Brake Pedal. The pedal is responsible for stopping the Clark forklift. The brake pedal is connected to the master cylinder with a hydraulic line. When it is depressed, a plunger inside the master cylinder is forced down, which moves brake fluid out of the master cylinder and into the Clark forklift's braking system.
Bleed Your Brakes And Get Most Out Of Your New Clark Forklift Brake Parts
Bleeding your Clark forklift brake from time to time is crucial to guarantee their good performance. To carry out this task properly, the only thing you have to do is follow the next steps:
Park your Clark lift truck on an even surface and set the parking brake.
Remove the reservoir master cylinder cap and check how much brake fluid level it has. If its brake fluid level is too low, refill until it reaches the "full" line.
Find the bleeder screws on each wheel and open them up.
Press the brake pedal a few times to pump fluid through the brake system.
Keep the pedal press down while closing the bleeder screws.
Repeat this process until clear brake fluid comes out of the bleeders.
Once you're finished, bleed the brakes, check the fluid level in the master cylinder, and add more if necessary.
Finally, test your Clark forklift brakes several times before returning them to service. If you haven't grasped how to do this task properly, we invite you to check out the next video, which explains how to bleed brakes on any type of vehicle.
Easy to Install Clark Forklift Brake Parts
Clark forklifts are equipped with a regular brake and an emergency brake. The regular Clark forklift brakes are used to stop them under normal operating conditions, while emergency brakes are used for parking or in case of an accident or other emergency. Both brakes must be in good working order to ensure the safety of the operator and those around you.
With the right tools, you can repair or replace the brake parts on your Clark forklift
From time to time, Clark forklift brakes need maintenance or be repaired. Before fixing or replacing any brake part on your Clark lift truck, you should first inspect the existing brake parts. This will help you find out what the problem was in the first place. If you can find out what caused the deterioration of your Clark forklift brake parts, then you can solve that problem so that new ones will not be affected similarly.
After a proper inspection, you should clean the entire surface of the brakes. Then you must decide if it is more comfortable for you to carry out the Clark forklift brakes repair without taking apart the wheel axle or if it is more comfortable for you to take apart the axle and do the repair on a workbench. This last option will take more time, but it will be more comfortable for you to work.
Once you dice how to carry out this task, then you have to follow the next steps:
Parking the lift truck at an even place.
Raise the front or rear of the forklift depending on which wheels you'll be servicing initially with a jack.
At this point, disconnect the axle wheel where the brake drum is mounted. If you are going to work directly then just remove the brake drum.
From The back of the brake plate, disconnect the brake line from the wheel cylinder.
Replace the wheel cylinder and brake shoes if necessary.
Inspect the internal side of the brake drum. If it is very worn, or it's cracked, replace it.
Once the new or repaired brake parts have been assembled, reconnect them to the brake fluid supply line.
Once you finish the last step, then bleed the brakes.
If your want to have a look at how these parts are fixed, check out the following video:
How Often Must Clark Forklift Brake Parts Be Tested?
OSHA requires forklifts to have brakes that meet certain standards. Clark forklift brakes must be tested regularly to ensure that they are functioning properly, as suggested in the following video:
A more closed inspection should be done at least every month. Clark forklift brake parts lifespan usually depends on the type of use they received. Generally speaking, these components usually last between 5000 to 700 hours of work. Therefore, it is recommended to carry out maintenance inspections at least every 2000 effective hours.
If the lift truck does not stop within a reasonable time, or if the Clark forklift brakes feel loose or spongy, they may need to be repaired or replaced. If you want to know more about forklift brake inspection, please check it out on our blog by clicking here.
Find New Clark Forklift Brake Parts at Lift Parts Warehouse
Clark forklifts are known for their quality and durability, but even the best machinery needs occasional maintenance. If you're looking for brand new Clark forklift brake parts, there's no better place to get them than at Lift Parts Warehouse. We carry a wide selection of brake parts compatible with many Clark lift truck models, so you're sure to find the right part for your needs.
We strive daily to continue increasing our stock to remain one of the best leading Clark forklift parts distributors in the United States. Our products have highly competitive prices that make them affordable to our customers. If you want to know more about our pricing policy, click here.
Plus, we count on an excellent shipping service that will deliver your order in a few days. And if for any reason you are not satisfied with what you received, you will have the chance to return it without issues, and your money will be refunded. For more information about our returns policy, click here.
So give us the opportunity and let our work speak for itself. You don't have to wait any longer; order your Clark forklift brake parts today! And get your Clark forklift back up and running in no time.
Takeaways
Clark forklift brakes are the set of elements that ensure that these vehicles slow down their velocity or stop completely according to the driver's requirements. They are a fundamental part of the maneuverability of Clark trucks and are directly related to the driver's safety. When one or more of these devices do not work properly, they become a potential source of risk. That is why they must receive regular maintenance, and their brake parts that can no longer perform well should be replaced immediately. That's why, when you need new brake parts for your Clark forklift, don't hesitate to contact Lift Parts Warehouse. We guarantee that our brake parts will help your Clark forklift work at its best.
#108 - 209 Glen Cove Rd,
Carle Place,
NY, USA
11514
$$-$$$$$
1.800.210.8170
4.7
5
