2389936 Master Cylinder for Clark, TCM & Nissan
Category: Clark Forklift Parts
Product Description
This is a Master Brake Cylinder for Clark, TCM & Nissan Forklifts with Parts Number: 2389936.
This part is also listed under the following part numbers:
- CLARK2389936
- 2389936
- CLARK 2389936
- cl2389936
- NISSANCK2389936
- CK2389936
- NISSAN CK2389936
- nick2389936
- TCMCK2389936
- CK2389936
- TCM CK2389936
- tcck2389936
Application: Fits the following Clark Forklift models:
Model
|
Serial Prefix
|
Engine
|
Make
|
GCS20
|
MBG138MB
|
4G54
|
CLARK
|
GCS25
|
MBG138MB
|
4G54
|
CLARK
|
GCS30
|
MBG138MB
|
4G54
|
CLARK
|
Product Specifications
Specifications of the 2389936 Master Cylinder:
Part Type |
Master Cylinder |
Brand |
Aftermarket |
Condition |
New |
Fitment |
Direct Replacement |
Length
|
5.59 inch or 142mm
|
Bore (ID)
|
1 Inch
|
Mounting Holes
|
2
|
Mounting Hole Distance
|
3.44 inch or 88mm
|
Push Rod
|
Included
|
Weight
|
3.8 lbs.
|
2389936 Master Cylinder
Your Forklift OEM Master Cylinder has a specific lifetime and after it's worn out, it must be replaced. The 2389936 Brake Master Cylinder is a great aftermarket replacement for your OEM master cylinder that will perform the same or better than the OEM cylinder.
Easy Steps to Replace Master Cylinder
A master brake cylinder is a crucial component of the brake system of your forklift. If the master cylinder does not work properly, it can cause brake failure, leading to serious damage to property and life in the workplace. Hence it is very important to know the signs of a failing master cylinder and how to replace it. Here are 6 easy steps to replace your faulty master cylinder:
- Remove the cap and remove brake fluid from the reservoir
- Detach the fluid level sensor
- With a wrench, remove all the hydraulic lines attached to the cylinder
- Detach the Master Cylinder from the mounting
- Install the new Master Cylinder
- Replenish the reservoir with fresh brake fluid
Warranty Information
The 2389936 Master Cylinder, also widely known by the part numbers CLARK 2389936, NISSANCK2389936, CK2389936, NISSAN CK2389936, or TCMCK2389936, comes with a 1-year limited warranty.
Frequently Asked Questions
Is this an OEM Master Cylinder?
No, it is an aftermarket item for OEM part 2389936.
Does it include the pushrod?
Yes, this master cylinder includes a pushrod.
What is the distance between mounting holes?
The distance between the mounting holes is 3.44 inches or 88mm.
Which Forklifts can use this Master Cylinder?
You can use this Master Brake Cylinder with Clark, TCM, and Nissan forklifts.
How many mounting holes does it have?
It has 2 mounting holes.
What is the neck diameter of this wheel cylinder?
It has a neck diameter of 1.34 inches.
Does this wheel cylinder include a pushrod?
Yes, it includes a pushrod.
What’s the cylinder length without the pushrod?
The length of the cylinder housing is 5.59 inches or 142mm.
What’s the bore size?
The bore or the inner diameter is 1 inch.
How much does it weigh?
It weighs 3.8 lbs.
Figure: Collection of Clark Brake System Parts at Lift Parts Warehouse
Are you looking for something else? Please browse our Part Catalog here. Lift Parts Warehouse provides quality aftermarket parts at a very reasonable price. All parts come with a limited 1 Year Warranty. We also guarantee a 100% fit for our parts.
1The actual product may vary slightly in color and appearance. This image is for illustration purposes only.