Brake shoes are an important brake part for many Clark forklift models. Depending on the driver's needs, they help these material handling vehicles slow down or stop completely. However, Clark forklift brake shoes wear out over time and must be replaced.
When your Clark forklift brakes no longer work as they should, they become a potential risk for your safety and those around you. This happens because the forklift's ability to stop will be affected.
Brake shoes should be checked regularly and replaced to ensure that your Clark forklift brakes can respond effectively. With this in mind, at Lift Parts Warehouse, we want to share how these devices work and what you should consider before purchasing new replacements.
This information will make choosing which set of Clark forklift brakes you need much easier. Check out our online catalog; we're sure you'll find the right replacement to keep going. At Lift Parts Warehouse, we're working 24/7 to guarantee that your purchasing experience will be as smooth and satisfying as possible.
So, don't miss this chance to pass by, and contact our professional staff today! Your new Clark forklift brakes are waiting for you.
Huge Collection of Clark Forklift Brakes at Your Disposal
Most Clark forklift models, especially those light types, have a brake system that works with brake drums. This braking system uses brake shoes to slow down the lift truck. Clark forklift brake shoes are semi-cylindrical devices attached to the brake plate.
The external surface of these brake elements presses against the brake drum internal surface of the wheel when the driver activates the brake pedal or the parking brake.
To grasp more easily how this Clark forklift brakes work, we invite you to take a look at the following video:
Types of Clark forklift brake shoes:
Hydraulic brake shoes: These types of brake shoes are the most common ones on Clark lift trucks. A hydraulic brake fluid expands a wheel cylinder to activate the brake's shoes.
Mechanical brake shoe: These brake shoes use a spring-loaded mechanism to create the stopping force. Generally, mechanical brake shoes are cheaper than hydraulic ones, but their mechanics wear out more easily.
In modern and large-capacity Clark forklift models, the brake shoes are being replaced by a brake system known as "wet brake discs," a type of hydraulic brake that uses hydraulic pressure to stop a vehicle.
How Long Do Clark Forklift Brake Shoes Last?
Sooner or later the brake shoes on a Clark forklift must be replaced
The lifetime of Clark forklift brakes depend on how long it takes for the lining to wear. This can vary depending on the work environment and how often the driver applies the brakes.
Clark forklift brake shoes are expected to last between 5,000 and 7,000 working hours. And because this lining wears out variability, it is recommended to carry out regular inspections every 250 working hours and maintenance at least every 2000 hours.
When to Replace Your Clark Forklift Brake Shoes
Because brake shoes are a critical part of the brake system on many Clark forklifts, it's important to recognize when it's the right time to replace them. When Clark forklift brake shoes start to wear, it won't take long for them to show signs of it. If we manage to detect them in time, we will be able to replace these brake elements before an accident occurs.
Weak Brake Pedal Action. Clark forklift brake shoes are designed to wear evenly and slowly. However, if they become excessively worn or overheated, their capacity to slow the vehicle may be reduced. This may result in a vehicle that takes longer to stop when the brakes are applied, especially during rapid maneuvering or heavy braking situations.
Parking Brake Troubles. Brake shoes are an important part of the Clark forklift. If the shoes become worn or dusty, they may not be able to hold the vehicle's weight without slipping. You may notice that the vehicle will go to one side or still move when the parking brake is engaged.
Unusual Brake Sounds. Excessively worn brake shoes may produce a scraping sound, while dusty or dirty brake shoes may produce a squeak. The unusual noises may be heard when the driver presses or releases the brake pedal.
Vibrations on the brake pedal. Extremely worn brake shoes can lead to non-uniform contact between the shoe surface and the inner face of the brake drum. Irregular contact will lead to a brake pedal vibrating sensation when pressed.
It is important to regularly check your Clark forklift brake shoes to ensure they are in good condition. If you notice any excessive wear or damage, be sure to replace them as soon as possible. By taking proper care of your Clark forklift, you can help ensure its longevity and performance.
New Easy-to-Install Clark Forklift Brakes
Regardless of vehicle type or make, most brake shoes are easy to change. The most complicated part is usually decoupling the brake drum hub, which tends to get stuck in the dust and dirt. But with the right tools, patience, and elbow grease, replacing the brake shoes on your Clark forklift would be done in just a few minutes.
With the right tools, replacing a Clark forklift brake shoe will be an easy task
Follow the next step if you want to place your old Clark forklift brake shoes.
First, remove the wheel. To accomplish this, you must remove the hubcap and loosen the bolts that hold the wheel in place.
Remove the retaining spring from the old brake shoe.
Once you remove both springs, you should be able to remove the old brake shoes from the brake plate. Pull the shoe away to detach them from the wheel cylinder.
Clean the whole brake area.
Now install the new brake shoes.
Put all the new spring holders in place.
Ensure the brake shoe adjuster cylinder gets in the right position.
Once both new brake shoes are in place, you can reattach the wheel to the Toyota forklift and replace the hub cap.
If you want the whole picture of this task, we invite you to take a look at the following video:
Even though the procedure is simple, it is possible that you may have to do other things depending on your Clark forklift model. That is why it is a good idea to consult the user manual for your specific vehicle and follow the instructions there.
Get Clark Forklift Brake Shoes at The Best Prices
Clark forklift brake shoe prices typically range from $10 to $300. Prices will not only depend on the lift truck model but also include aspects such as the type of lining material they have. Plus, in the market, you can choose between OEM or aftermarket brake shoes.
OEM brake shoes are made specifically to fit in their corresponding lift truck model, although they tend to be a little more expensive than aftermarket ones. Aftermarket brake shoes are usually just as good as the original ones, with the difference that they are usually manufactured to fit various types of forklift models.
As a result, when choosing Clark forklift brake shoes, it is important to consider all of these factors in order to make the best decision for your needs.
Benefits of Buying Clark Forklift Brakes at Lift Parts Warehouse
When you need quality Clark forklift brake shoes, there's no better place than Lift Parts Warehouse to get them. In our online catalog, you will find a diverse variety of brake shoes compatible with many Clark forklift models.
At Lift Parts Warehouse, we strive every day to continue expanding our inventories in such a way that our customers are not left without the possibility of finding the part they need.
And thanks to our extensive network, we're able to offer Clark forklift brake pads at highly competitive prices. All of our products come with a one-year warranty, so you can rest assured that you're getting the most for your money.
Plus, we have an excellent shipping service that will deliver your order in no time. So when you need quality Clark forklift brake shoes, be sure to check out Lift Parts Warehouse.
Takeaways
Clark forklift brake shoes are a vital component of the braking system for many forklift trucks. These parts are responsible for slowing down or completely stopping the vehicle when its lining presses the inner face of the brake drum of the wheel.
Due to continuous use, these brake elements must be replaced from time to time. It is essential to do so before the brakes stop responding completely; otherwise, the chance of an accident it's high.
When you require new brake shoes for your Clark forklift, do not hesitate to contact the services of Lift Parts Warehouse. We assure you that with our brake shoes, your Clark forklift will once again be working at its best.
#108 - 209 Glen Cove Rd,
Carle Place,
NY, USA
11514
$$-$$$$$
1.800.210.8170
4.7
4512
5
