Forklift brake inspection

Reading time: 4 min 40 sec.


When you have a forklift, one of the most important things you need is to make sure that the brakes are in good shape. If the brakes aren't working correctly, it could be hazardous to operate the forklift. In this article, we'll show you how to include the brakes in the Forklift Inspection so that you can be sure that they are in good condition.

Table of contents

  1. Importance of a Forklift Brake Inspection
  2. Common causes for Forklift Brake Failure
  3. Include the brake system within your Forklift Inspection
  4. Parts of a Brake System
  5. Brakes and other Toyota Forklift parts at Lift Parts Warehouse
  6. Takeaways

Importance of a Forklift Brake Inspection

A forklift inspection is a necessary safety procedure that should be done regularly. The brakes on a forklift are critical for stopping the vehicle quickly and safely. If the brakes are not working correctly, it can result in a severe accident.You can inspect several things to make sure the brakes are functioning properly. First, check the brake pads for wear and tear. If they are worn down, they will need to be replaced. You should also check the hydraulic fluid level to ensure it is at the correct level. If it is low, you will need to add more fluid.You should also test the braking ability of the forklift by driving slowly forward and then slamming on the brake pedal. The forklift should stop quickly; if it doesn't, the brakes may need to be adjusted or replaced.

It is important to have a regular brake inspection schedule for your forklift. This will help ensure that the brakes are always in good working condition and minimize the risk of an accident. Contact our professional staff, and they can provide you with replacement parts if necessary to perform a forklift repair.

Toyota Forklift brake Inspection
Replacing forklift brake parts

Common causes for Forklift Brake Failure

In order to maintain a safe work environment, it is important for employers to inspect forklift brakes properly. A Forklift Brake Inspection should be done regularly, and any issues should be addressed immediately. Here are several common causes of forklift brake failure:

  • To avoid damaging the vehicle or compromising its safety, it is important to use a parking brake when the forklift is not in motion. Apply your forklift's brakes by applying pressure with both feet on the pedal and adjust accordingly so that they are at their fullest extension but not biting too hard into the material underneath them (especially if you're going over small obstacles).
  • When driving a forklift, be sure to use just one foot at a time. Going "two-footed" with both feet on the pedals leads to partially engaged brakes. It can cause wear much faster because there's pressure from both lines rubbing against each other instead of being separated by a space as it should be for maximum effectiveness.
  • When driving a forklift, you must not brake harshly or quickly. Harsh braking can cause unnecessary wear on your vehicle's brakes and accelerate the aging process of metal parts like rusted hoses (often when people don't properly maintain forklifts).

Include the brake system within your Forklift Inspection

Brake inspection is an important part of regular forklift maintenance. By inspecting your brakes regularly, you can help ensure that your forklift operates safely and efficiently. First, inspect the brake pads for wear and damage. If the pads are worn down or damaged, they will need to be replaced. Next, check the brake fluid level in the reservoir. If the fluid level is low, you will need to add more fluid. Be sure to use only DOT-approved brake fluid.

Repairing forklift
Repairing a Forklift brake

Then, test the braking system by applying pressure to the brake pedal. The pedal should feel firm and solid when depressed. If it feels spongy or soft, the brake system may need to be serviced. Finally, inspect the brake drums and discs for wear and damage. If the drums or discs are worn down or damaged, they will need to be replaced. By following these steps, you can help ensure that your forklift's brakes are in good condition and safe to use.

Parts of a Brake System

Several parts of a brake system work together to stop the lift trucks. The three main components of a brake system are the brake pedal, the master cylinder, and the brake lines. When you step on the brake pedal, it activates the master cylinder, which pushes fluid down the brake lines to each wheel. This causes pistons in the calipers at each wheel to press against the rotor, causing it to stop rotating.

The most important part of a brake system is the pads and shoes. These rub against the rotor or drum to create friction and slow down the vehicle. Over time, these pads and shoes wear down and need to be replaced. If they aren't replaced when they're needed, it can cause damage to the rotors or drums and will eventually lead to a brake failure.

Brakes and other Toyota Forklift parts at Lift Parts Warehouse

There are many reasons to buy brake shoes at Lift Parts Warehouse. We have a wide selection of top-quality brands, and we offer competitive pricing on all our products. But perhaps the most important reason to buy brake shoes from us is our commitment to customer service. We're always here to help you find the perfect product for your needs, and we'll provide expert advice whenever you need it.

47040-16602-71 Toyota Forklift 8FGU15

We know that safety is your top priority, which is why we only carry the highest-quality brake shoes available. So, from our inventory of Toyota Forklift Parts we made our top 3 of best brake shoes:

  • Brake Shoe For Toyota : 47513-33060-71: If you're looking for a replacement brake shoe for your Toyota Forklift, this one is an excellent option. This shoe is made from high-quality materials and is designed to last. It's also easy to install so that you can get back to work in no time.
  • BRAKE SHOE FOR TOYOTA : 47403-12810-71: this is another great option for those buyers looking for a reliable and durable brake. This brake is made from high-quality materials, so you can trust that it will last long and perform well. Additionally, this brake shoe is easy to install, so you won't have to waste time or money on installation.
  • BRAKE SHOE FOR TOYOTA: 47405-26640-71: is an OEM replacement brake shoe that fits most Toyota models. Like all our Toyota Forklift parts, this part features a sturdy construction and long lifespan, making it ideal for heavy-duty applications.


Forklift Brake Inspection is an important part of regular maintenance, so be sure to include it in your checklist. Regular inspections can help prevent common causes of brake failure and keep your lift running safely and smoothly. Are you looking for Toyota forklift parts? Check out our selection of Brake System parts and other Toyota parts.