43211-23471-71 Aftermarket Replacement Knuckle RH for Toyota Forklifts

Product Description

The 43211-23471-71 knuckle RH is a metal component that connects the steering arm to the wheel hub assembly. The wheel can turn left or right according to the steering input. It also supports the forklift weight and absorbs shocks and vibrations from the road. This knuckle RH is located on the right-hand side of the front axle and is attached to the spindle by a kingpin.

THIS PART CAN ALSO BE FOUND UNDER THE FOLLOWING PART NUMBERS: TOYOTA43211-23471-71 TOYOTA43211-23471-71 TY432112347171 TOYOTA 43211-23471-71 TY 432112347171 TY 43211-23471-71 TOYOTA432112347171 432112347171 TOYOTA 432112347171, TY43211-23471-71.

43211-23471-71 Knuckle RH

Product Specifications

The 43211-23471-71 knuckle RH has the following specifications:

Features and Benefits

This 43211-23471-71 knuckle RH offers the following features and benefits:

• High-quality steel material that resists corrosion, wear, and fatigue

• Precise engineering that ensures a perfect fit and alignment with the steering arm and wheel hub assembly

• Smooth surface that reduces friction and noise

• Easy installation that requires no special tools or modifications

• Affordable price that saves you money compared to OEM parts

Knuckle RH

Applications

The 43211-23471-71 knuckle RH can be used in Toyota forklifts.

Warranty Information

This knuckle RH has a one-year warranty covering any defects in materials or workmanship.

Not Sure Will This Part Fits Your Equipment?

If you are not sure whether this part will fit your Toyota forklift or not, don't worry. We are here to help you. You can contact us through any of our channels:

• Phone number: 1.800.210.8170

• Email: [email protected]

• Contact form: https://www.liftpartswarehouse.com/articles.asp?id=83

• Live chat

Our friendly and knowledgeable staff will assist you with any questions or concerns. We will also help you find the right part for your specific model and serial number.

Frequently Asked Questions & Answers

Q: How do I know if my knuckle RH is worn or damaged?

A: Some signs that indicate that your knuckle RH needs to be replaced are:

• Excessive play or looseness in the steering wheel

• Difficulty in steering or turning the forklift

• Abnormal noises or vibrations from the front axle

• Uneven tire wear or alignment issues

Q: How do I remove and install the knuckle RH?

A: To remove and install the knuckle RH, you will need to follow these steps:

• Raise and support the forklift securely on jack stands.

• Remove the wheel and tire assembly.

• Remove the brake caliper and rotor.

• Remove the cotter pin and nut from the kingpin.

• Use a hammer and a punch to drive out the kingpin from the spindle.

• Remove the knuckle RH from the spindle.

• Clean and inspect the spindle and kingpin for any damage or wear.

• Apply grease to the new knuckle RH and slide it onto the spindle.

• Align the holes on the knuckle RH and spindle and insert the new kingpin.

• Secure the kingpin with a new nut and cotter pin.

• Reinstall the brake rotor and caliper.

• Reinstall the wheel and tire assembly.

• Lower the forklift and check the steering alignment.

Q: How often should I replace my knuckle RH?

A: There is no fixed interval for replacing your knuckle RH, as it depends on various factors such as driving conditions, usage frequency, maintenance schedule, etc. However, as a general rule, you should inspect your knuckle RH at least once a year or every 10,000 miles and replace it if you notice any signs of wear or damage.

Q: What are the advantages of using an aftermarket replacement knuckle RH over an OEM part?

A: Some of the advantages of using an aftermarket knuckle RH over an OEM part are:

Lower cost

Aftermarket parts are usually cheaper than OEM parts, saving you money in the long run.

Availability

Aftermarket parts are more readily available than OEM parts, saving you time and hassle in finding the right part for your forklift.

Quality

Aftermarket parts are made from high-quality materials and undergo rigorous testing and quality control to ensure they meet or exceed OEM standards.

Q: What are the disadvantages of using an aftermarket replacement knuckle RH over an OEM part?

A: Some of the disadvantages of using an aftermarket replacement knuckle RH over an OEM part are:

Compatibility

Aftermarket parts may not fit or function exactly as OEM parts, which may require adjustments or modifications to your forklift.

Warranty

Aftermarket parts may not be covered by your forklift’s warranty, which may void it or affect your claim in case of any issues.

Support

Aftermarket parts may not have the same level of support or service as OEM parts, making it harder to get assistance or feedback in case of any problems.

Frequently Bought Together

If you are looking for other parts that go well with the 43211-23471-71 knuckle RH, here are some suggestions:

• Aftermarket Replacement Knuckle LH FOR TOYOTA: 43212-23471-71

• Aftermarket Replacement Power Steering O/h Kit For Toyota: 04433-20080-71

• Aftermarket Replacement Seal Kit - King Pin For Toyota: 04432-U2020-71