1386176 3/4 Inch Oil Pump Tube for Hyster Forklifts
If you are looking for a high-quality oil pump tube for your Hyster forklift, you have come to the right place. Lift Parts Warehouse offers the best deals on 1386176 3/4 inch oil pump tubes compatible with various Hyster forklift models. This part is essential for properly functioning your forklift's hydraulic system, as it delivers oil to the cylinders and valves that control the lifting and tilting mechanisms. Here is everything you need to know about this product before you place your order.
Product Description
The 1386176 3/4 inch oil pump tube is a cylindrical metal device with an inlet and an outlet port for oil flow. It is connected to the engine by a belt or a chain, and it rotates at a high speed to create a suction force that draws oil from the reservoir and pushes it through the tube. The oil pressure and flow rate depend on the speed and size of the pump, as well as the viscosity and temperature of the oil. It is designed to withstand high pressures and temperatures and to provide a steady and reliable oil supply to your forklift's hydraulic system.
This part can also be found under the following part numbers: HY1386176 1386176 HYSTER 1386176 HYSTER1386176 1386176.
3/4 Inch Oil Pump Tube
Product Specifications
The specifications of this oil pump tube are mentioned below.
Condition | New |
Brand | Aftermarket |
Part Type | Oil pump tube |
Manufacturer Part Number | 1386176 |
Compatible Equipment Type | Forklift |
Compatible Equipment Make | Hyster |
Features and Benefits
High-quality construction for durability and corrosion resistance
Precision-engineered to match the original specifications of your forklift
Easy to install and replace with minimal tools and time
Improves the performance and efficiency of your forklift's hydraulic system
Reduces the risk of oil leaks, overheating, and damage to other components
Extends the lifespan of your forklift and lowers the maintenance costs
Recommended Use
The 1386176 oil 3/4 inch tube pump is recommended for use in Hyster forklifts.
Hyster Forklift
Warranty Information
The 1386176 3/4 inch oil pump tube comes with a one-year warranty from Lift Parts Warehouse, which covers any defects in materials or workmanship. If you encounter any issues with this product within the warranty period, please contact us and we will either repair or replace it at no extra cost. Please note that the warranty does not cover normal wear and tear, misuse, abuse, or improper installation.
Not Sure If This Part Fits Your Equipment?
We understand that finding the right part for your forklift can be challenging, especially if you don't have your equipment's exact model or serial number. That's why we offer multiple ways for you to contact us and get expert advice from our friendly and knowledgeable staff. You can contact us through any of these channels:
We will gladly help you find the right part for your forklift, answer any questions, and provide a free quote.
Frequently Asked Questions
Q: How do I know if my oil pump or tube is faulty?
A: Some of the signs that indicate that your oil pump or tube may need to be replaced are:
Low or erratic oil pressure or flow rate
Oil leaks from the pump or the tube
Abnormal noises or vibrations from the pump or the engine
Reduced lifting or tilting capacity or speed of your forklift
Overheating or smoking of the engine or the hydraulic system
If you notice any of these symptoms, you should inspect your oil pump tube and replace it if necessary.
Q: How do I install this pump?
A: The installation process of this oil pump tube is relatively simple and straightforward, but it may vary depending on the model of your forklift. Here are the general steps to follow:
Disconnect the battery and the ignition of your forklift
Locate the oil pump on the side of the engine and remove the belt or chain that connects it to the engine
Disconnect the oil inlet and outlet hoses from the pump and drain the oil into a container
Unscrew the bolts that secure the pump to the engine and remove the old pump
Clean the mounting surface and apply a thin layer of gasket sealant
Align the new pump with the mounting holes and secure it with the bolts
Reconnect the oil inlet and outlet hoses to the new pump and tighten the clamps
Refill the oil reservoir with fresh oil of the recommended grade and viscosity
Reconnect the belt or chain that connects the pump to the engine
Reconnect the battery and the ignition of your forklift
Start the engine and check for any leaks or abnormal noises
Test the lifting and tilting functions of your forklift
Q: How often should I replace my oil pump?
A: The frequency of replacing your oil pump depends on several factors, such as:
The age and condition of your forklift
The frequency and intensity of use of your forklift
The quality and quantity of oil in your hydraulic system
The environmental conditions where you operate your forklift
Generally, you should inspect your oil pump at least once a year or every 1000 hours of operation, whichever comes first. You should also check it more often if you notice any signs of wear or damage or if you experience any problems with your hydraulic system. If your oil pump tube is worn out, cracked, leaking, or defective, replace it immediately.
Q: What are the benefits of buying from Lift Parts Warehouse?
A: Lift Parts Warehouse is your one-stop shop for all your forklift parts needs. We offer:
A wide selection of high-quality parts for various brands and models of forklifts
Competitive prices
Fast and free shipping on orders over $650 within the continental US
A one-year warranty on all our products
A 30-day return policy
A secure online payment system with multiple options
A friendly and knowledgeable customer service team that is ready to assist you
Need More Parts? More Parts From Lift Parts Warehouse
You can check out our online catalog here for more parts for your Hyster forklift. We have thousands of parts in stock for various brands and models of forklifts, including Hyster. Whether you need
Or any other part, we have it all. You can search by part number, name, type, or forklift model. You can also contact us if you need help finding a specific part or have questions about our products. We will gladly assist you and provide you with a free quote.