Hyster Forklift Parts: Why You Need to Change the filters?
Reading time: 3 min 57 sec.
If you're a Hyster forklift driver, then you know the importance of keeping your machine in good condition. That means regularly replacing the filters to ensure optimal performance. How many filters does a Hyster forklift use? Where to find a suitable replacement for them? Lift Parts Warehouse is here to help you with your forklift needs.
Why do you need to change your Hyster forklift filters?
Forklifts are one of the most efficient modes of transportation, with low costs per ton compared to other modes. They, however, do have their limitations, including high wear and tear on the equipment if not used or maintained correctly. There are many different types of forklift filters on the market: Oil Filters, Air Filters, Transmission Filters, Fuel Filters, Hydraulic Filters, and others. Thus, choosing the right one for your Hyster forklift model is essential.
Forklift filter types
Forklift Oil Filters
Oil filters are a crucial component of Hyster forklift maintenance. Oil is what keeps your forklift's moving parts greased and gliding smoothly, so it's important to have clean oil throughout the system at all times. This filter helps ensure that the dirt does not get into your engine system, which can cause damage to your forklift. Changing your forklift's engine oil filter is a simple way to keep track of when you last changed it. Include in your maintenance routine a forklift oil filter changing every 500 hours or every year in case the forklift is sporadically used.
Forklift Air Filters
A forklift air filter is a device that helps to clean the air that is used in an internal combustion forklift. The filter helps remove any dirt or debris from the air before it is used in the forklift engine. This helps to keep the forklift running smoothly and prevent any malfunctioning. You should check your forklift's air filter every 200 hours to check if changing is needed or only cleaning is required. On the other hand, some manufacturers recommend replacing it every 200 miles.
Transmission Forklift Filters
A transmission filter is a device that helps to protect the engine and other components of the transmission by catching debris and contaminants before they reach into their internal components. This forklift part should be replaced every 2000 hours.
Forklift Fuel Filters
It helps remove dirt and other particles from the fuel, preventing them from entering the engine. In this way, this filter avoids these impurities from fouling the fuel injectors, fuel pumps, and rest of the fuel system. The frequency of filter replacement would depend on the manufacturer. However, before replacing a fuel filter, the average time is around 200 hours of use. On the other hand, if you are experiencing any complications with the fuel filter, it is recommended that you replace it sooner. When changing the filter on a fuel-injected vehicle, it is essential to remember that you must disable the pump not to cause any more pressure than what's already there.
Forklift Hydraulic Filters
A hydraulic filter is a device used to clean the forklift hydraulic fluid. The filter catches any impurities or debris in the hydraulic fluid, keeping it clean and allowing it to flow correctly. Every time you change your forklift's hydraulic oil, the filter should also be changed. This is to clear out any dirt and debris that reaches the hydraulic system. Commonly, these filters are replaced every 1,200 hours or once a year, whichever comes first.
During a forklift filter replacement
The first step is to determine what type of forklift filter you need. These are not interchangeable, and neither are they suitable for all forklift models.
Be sure to dispose of the old filters properly and recycle any oil or other fluids that may have been spilled.
When changing the filter on your forklift, it's essential to be mindful of how you remove and replace them not to damage the new filter or forklift component during the installation process.
Once the old filter is removed, the new one can be installed. Be sure to apply a light coat of oil to the gasket on the new filter before installing it.
Buy all Hyster Parts at Lifts Parts Warehouse
When you are looking for a quality supplier of Hyster filters, it is important to consider Lift Parts Warehouse. We have a wide selection of filters to fit most makes and models of forklifts, including the Hyster brand, and we offer competitive prices on our high-quality products. In addition, we have a team of experts who can help you choose the right filter for your forklift model, and we offer fast shipping to all U.S. so you can get back to work quickly.
Do you need more reasons? A few of the reasons why you should buy your forklift filters and the rest of Hyster parts from Lift Parts Warehouse:
We carry an extensive selection of filters to suit all makes and models of forklifts.
Our prices are unbeatable - we offer some of the best deals on forklift filters available anywhere.
We stock high-quality filters from top brands.
Check our filter catalog if you are looking for any filter that helps your forklift run more efficiently. A filter that is clogged with dirt and debris can cause the engine to work harder than necessary, leading to decreased fuel efficiency and premature engine wear. Avoid this scenario and get today a quality filter for your Lift truck!
Changing your Hyster filters properly is necessary to prevent wear and tear on equipment.
Many different types of filters need to be used on a forklift, each type with its respective purpose.
During a forklift filter replacement, check to see what type of filter you need before disposing of the old ones.
Lift Parts Warehouse stocks an extensive selection of filters and other Hyster Forklift Parts for most types and brands of forklifts, from the Hyster brand.