93051-10078 Lift Cylinder Seal Kit for Mitsubishi & Caterpillar Forklifts

Product Description

The 93051-10078 lift cylinder seal kit is a set of components to seal the hydraulic lift cylinder in your Mitsubishi or Caterpillar forklift. The lift cylinder is responsible for raising and lowering the forks and the load, so keeping it in good condition and preventing leaks or damage is essential. It includes o-rings, gaskets, backup rings, wipers, and other parts that create a tight seal between the cylinder and the piston rod. The seal kit is made of high-quality materials that withstand high pressure, temperature, and wear and tear.

THIS PART IS ALSO LISTED UNDER THE FOLLOWING PART NUMBERS: MB93051-10078 MB9305110078 MB 93051-10078 MB93051-10078 MB 9305110078 MB9305110078 MITSUBISHI & CATERPILLAR93051-10078 MITSUBISHI & CATERPILLAR9305110078 MITSUBISHI & CATERPILLAR9305110078 9305110078 MITSUBISHI & CATERPILLAR 9305110078.

THIS PART CAN ALSO BE FOUND UNDER THE FOLLOWING PART NUMBERS: CATERPILLAR/TOWMOTOR 93051-10078, CT 9305110078, CT93051-10078, CATERPILLAR/TOWMOTOR93051-10.

93051-10078 Lift Cylinder Seal Kit

Product Specifications

The specifications of the 93051-10078 lift cylinder seal kit are mentioned below.

Features and Benefits

The 93051-10078 lift cylinder seal kit offers several features and benefits that make it a great choice for your forklift:

• It is compatible with a wide range of Mitsubishi and Caterpillar forklift models. You can check the compatibility list on our website or contact us if you are unsure if this part fits your equipment.

• It is durable and reliable. It is made of premium materials that can last long and resist corrosion, abrasion, and deformation.

• It improves the performance and safety of your forklift. It prevents any leaks or malfunctions in the lift cylinder, which can affect your forklift's lifting capacity, stability, and efficiency. It also protects the cylinder from dirt, dust, and moisture that can cause damage or rust.

Recommended Use

The 93051-10078 lift cylinder seal kit is recommended for use in any Mitsubishi or Caterpillar forklifts.

Mitsubishi and Caterpillar forklifts

Warranty Information

The 93051-10078 lift cylinder seal kit comes with a one-year warranty from Lift Parts Warehouse.

Not Sure Will This Part Fits Your Equipment?

If you have any doubts or questions about whether this part fits your equipment or not, you can contact us through any of our channels:

• Phone number: 1.800.210.8170

• Email: [email protected]

• Contact form: https://www.liftpartswarehouse.com/articles.asp?id=83

• Live chat

Our friendly and knowledgeable customer service team will happily assist you and answer all your inquiries.

Frequently Asked Questions

Q: How do I know if I need to replace the lift cylinder seal kit?

A: Some of the signs that indicate that you need to replace the lift cylinder seal kit are:

• Hydraulic fluid leakage from the cylinder or rod

• Reduced lifting capacity or speed

• Difficulty in raising or lowering the forks or load

• Unusual noises or vibrations from the cylinder

• Visible cracks, cuts, or wear on the seals

Q: How often should I replace the lift cylinder seal kit?

A: The frequency of replacing the lift cylinder seal kit depends on several factors, such as the usage, environment, and maintenance of your forklift. However, a general rule of thumb is to replace the seal kit every two years or 2,000 hours of operation, whichever comes first.

Q: How do I install the lift cylinder seal kit?

A: The installation process of the lift cylinder seal kit varies depending on the model and type of your forklift. However, the basic steps are:

• Disconnect the battery and turn off the engine

• Remove the hydraulic hoses and fittings from the cylinder

• Loosen and remove the cylinder from the mast

• Remove the piston rod from the cylinder

• Remove the old seals and clean the cylinder and rod

• Install the new seals according to the instructions in the manual or video

• Reassemble the cylinder and rod

• Reattach the cylinder to the mast

• Reconnect the hydraulic hoses and fittings

• Test the operation and check for leaks

Need More Parts? More Parts From Lift Parts Warehouse

If you need more parts for your Mitsubishi or Caterpillar forklift, you can check out our online catalog, where we have thousands of parts in stock and ready to ship. We offer fast and free shipping on orders over $650 within the continental US.

At Lift Parts Warehouse, we are committed to providing you with the best service and quality in the industry. We only sell genuine and aftermarket parts that meet or exceed OEM standards. We also have a team of experts who can help you with any technical or installation issues.