0256313 Control Box for JLG Aerial Lifts

Product Description

The 0256313 Control Box is a high-quality replacement part for JLG aerial lifts. It is compatible with various models of JLG boom and scissor lifts and can be easily installed by following the instructions. The control box allows you to operate the lift functions smoothly and safely, and JLG engineers have tested it to meet the original specifications. If you want a reliable and durable control box for your JLG lift, order the 0256313 Control Box today.

FORKLIFT BOX - CONTROL FOR JLG AERIAL LIFT PARTS. THIS ITEM CAN ALSO BE FOUND UNDER THE FOLLOWING PART NUMBERS: JLG0256313, JLG256313, JL 256313, JL 0256313, JLG 256313, JLG 0256313, 0256313, 0256313, JL0256313, 256313, JL256313

Control Box for JLG

Product Specifications

The specifications of the 0256313 Control Box for JLG Aerial Lifts are mentioned below.

Condition	New
Brand	Aftermarket
Part Type	Control Box
Manufacturer Part Number	JL0256313
Compatible Equipment Type	Aerial Lift
Compatible Equipment Make	JLG
Modified Item	No

Warranty Information

The 0256313 Control Box has a six-month warranty

Applications

JLG Aerial Lift

Frequently Asked Questions

Q: How do I install the 0256313 control box in JLG Aerial Lifts?

A: To install the control box, you need to follow these steps:

Disconnect the power supply and the battery from the lift.
Remove the old control box by unscrewing the bolts and disconnecting the wires.
Mount the new control box on the platform using the bolts and washers provided.
Connect the wires to the corresponding terminals on the control box.
Reconnect the power supply and the battery to the lift.
Test the control box by operating the lift functions.

Q: How do I troubleshoot the control box for JLG Aerial Lifts?

A: If you encounter any problems with the control box, you can try these troubleshooting tips:

Check the power supply and the battery voltage. The control box requires a 12V DC power source.
Check the fuses and circuit breakers on the control box. Replace any blown fuses or reset any tripped circuit breakers.
Check the wiring connections on the control box. Make sure they are tight and secure.
Check the joystick, buttons, and switches on the control box. Make sure they are not damaged or stuck.
Check the error codes on the display panel of the control box. Refer to the manual for the meaning and solution of each code.

Q: How do I calibrate the 0256313 Control Box?

A: To calibrate the control box, you need to follow these steps:

Turn on the power source and press and hold the calibration button on the control box for three seconds until you hear a beep.
Move the joystick in all directions and observe the LED indicators on the control box. They should light up according to the direction of movement.
Release the joystick and press and hold the calibration button again for three seconds until you hear another beep. The calibration is complete.

Need More Parts? More Parts From Lift Parts Warehouse

If you need more products from this category, we have here a large collection of:

At Lift Parts Warehouse, we carry many high-quality replacement parts to keep your aerial lift parts in top condition. Browse our JLG Aerial Lift Parts Catalog here. And if you need help finding the right part for your aerial lift, our expert customer service team is here to assist you at 1.800.210.8170. Shop now and experience the Lift Parts Warehouse difference.