1204-412 PMC 36/48V 300A DC Motor Controller
Category: Curtis Model 1204
Product Description
This is a Curtis PMC MOSFET Motor Speed Controller with Parts Number: 1204-412.
Cross Reference Numbers:
- CC101840203
- CL7007667
- CT1204-412
- HU1674864R
- PHA000029438
- PHAX00001232
- YP5243072-10R
- 101840203
- 7007667
- 1674864R
- A000029438
- AX00001232
- 5243072-10R
Suggested Accessories Parts Numbers: 76-1415-GOLF, 76-908HRNS48V, 76-908R3648BNJO, 94-CM174, 100-586117111, 43-8012-30, 76-1415-GOLF, 76-908HRNS48V, 76-908R3648BNJO, 94-CM174, 100-586117111, 43-8012-30, 76-1415-GOLF, 51-42L500NN0S, 51-42L700NN0S, 1313-4331, 1314-4402.
Application: The Curtis 1204-412 MOSFET Electronic Motor Controller works on many E-Z-Go and Club Car Golf Carts models as well as a variety of other electric vehicle applications, including industrial trucks, personnel carriers, material handling vehicles, golf carts, etc.
Product Specifications
1204-412 Curtis Controller Specification:
Part Category
|
Motor Speed Controller
|
Brand
|
Curtis
|
Fitment |
Direct Replacement |
Current Rating
|
300A
|
2 Minutes Current Rating
|
300A
|
5 Minutes Current Rating
|
200A
|
1 Hour Current Rating
|
125A
|
Voltage Drop @ 100 Amps
|
0.35V
|
Under-Voltage Cutback
|
21V
|
Nominal Input Voltage
|
36-48V
|
PWM Operating Frequency
|
15 kHz
|
Standby Current
|
> 20mA
|
Standard Throttle Input
|
5 kΩ ±10%
|
Operating Temperature Range
|
-25°C to 75°C
|
Low Current Connection
|
3 Push-on 1/4" Terminals
|
High Current Connection
|
4 Bus Bars
|
Weight
|
1.8 kg (4 lbs.)
|
Dimension
|
146mm×170mm×70mm (5.75"×6.75"×2.8")
|
Condition
|
Rebuilt
|
Fitment
|
Direct Replacement
|
Curtis PMC 1204-412 Controller
The Curtis 1204-412 is a remanufactured power MOSFET PMC Motor Speed Controller for E-Z-Go Club Car and other Golf Carts as well as many other industrial and utility eclectic vehicles. It is a 36/48V 300A controller with 0-5kΩ throttle input. The Curtis PMC 1204-412 offers smooth, silent, and efficient control of the speed and torque of the motor on a wide variety of electric utility and industrial vehicles.
Figure: 1204-412 36/48V 300A PMC Motor Controller
Figure: Curtis PMC 1204-412 Controller Dimension
Figure: 1204-412 Controller Wiring
Key features of the Curtis 1204-412
Key Features of the Curtis PMC 1204-412 includes
- Built-in Acceleration circuit limits maximum acceleration.
- Current multiplication provides a greater driving range per charge.
- High-frequency switching and ultra-low voltage drops
- Protected by rugged anodized aluminum enclosure
- Easy mounting and wiring via push-on connectors
- Easy installation, only requires a throttle potentiometer
- Variable Drive and Brake Control
- Power MOSFET designs allow high efficiency and silent operation
- Overheating protection
- Low voltage protection
- Accelerator Potentiometer fault protection (Runaway Protection)
- Easy and direct replacement, no adjustment is required
- Tin-plated, solid copper bus bars
More details on 1204-412 Curtis Controller Specification can be found here in the manual.
Important Note
The Curtis 1204-412 DC Motor Controller does not operate at 48V and is for use only on vehicles with a series-wound motor. Before installing the 1204-412 Controller, you must make sure that the vehicle motor uses a 0-5kΩ Throttle Input, specifically in the case of Club Car golf carts. The early Club Car carts used 0-5kΩ throttle input and the later ones switched to 5k-0Ω input. Using a motor controller with the wrong throttle input will cause unexpected acceleration and may result in serious injury. Here’s how to know which one is right for you:
- If your original controller had a black, metal case, this controller is suitable for your cart.
- If your original controller had a silver metal case, this controller is not compatible with your cart.
1204-412 PMC Controller Installation Safety Checklist
Please go through the following steps before operating your vehicle with the replaced motor controller.
- Remove the drive wheels from your vehicle
- Make sure there is no one in the front or back of the vehicle
- Turn the key switch off and put it in neutral
- Use safety glass and electrically insulated tools
Warranty Information
The Curtis 1204-412 DC Motor Controller comes with a 6-month limited warranty, extendable up to 36 months.
Frequently Asked Questions
Is the Curtis 1204-412 a new Controller?
No, the 1204-412 Curtis Controller is a rebuilt item.
What is the current rating of the 1204-412 Controller?
This Controller is rated at 275 Amps.
Does it work with 5k-0Ω throttle input?
The 1204 027 Curtis DC Controller does not work with 5k-0Ω throttle input. It only works with 0-5kΩ throttle input models.
Does it work in 24V?
No, it will not work with 24V input.
Do I need to pay a core charge for the Curtis Model 1204-412?
Yes, all remanufactured and rebuilt items are subject to a core charge. A core charge is refundable. The refund amount will be determined by the status of the core returned.
How many bus bars does it have?
It has 4 tin-plated solid copper bus bars, M-, B-, B+, and A2.
More Parts From Curtis
Besides Curtis 1204-412 Controller, if you need More Electrical Parts from Curtis, we have a huge collection of
- Curtis 36V Battery Fuel Gauge
- Curtis XLR & Molex Cable Assembly
- Curtis Club Car Handset Adapter Cable
- Curtis 36/48V Gauge
- Curtis 36/48V Battery Discharge Indicator (BDI)
- Curtis PM Controller
- Curtis E-Z-GO PDS Controller
- Curtis CLUB CAR ERIC Controller
- Curtis DCS Controller and many more!
Figure: A sample of Curtis Parts at Lift Parts Warehouse
Are you looking for something else? Please browse our Part Catalog here. Lift Parts Warehouse provides quality aftermarket parts at a very reasonable price. All parts come with a limited 1 Year Warranty. We also guarantee a 100% fit for our parts.