Home > Categories > FORKLIFT ENGINES > Nissan > Nissan A15 Engine
to find your parts, please choose a sub-category:
Cooling Cylinder Head Electrical
Gasket Ignition Manifold
Nissan A15 Engine Major OverHaul Kits Nissan A15 Engine Minor OverHaul Kits Oil Control
Pistons Seal Timing

Online Catalog Lookup for New and Used Nissan A15 Engine Parts


Sort By:
Page of 2
ROTOR FOR NISSAN : NI22157-23G15 GUIDE - INTAKE VALVE FOR NISSAN : NI13212-H8510 SEAL - OIL FOR NISSAN : NI11131-18002
IN STOCK READY TO SHIP IN STOCK READY TO SHIP IN STOCK READY TO SHIP
GUIDE - EXHAUST VALVE FOR NISSAN : NI13213-H2311 SEAL - OIL FRONT FOR NISSAN : NI11131-01M00 RETAINER - VALVE SPRING FOR NISSAN : NI13209-H2302
IN STOCK READY TO SHIP IN STOCK READY TO SHIP IN STOCK READY TO SHIP
THERMOSTAT FOR NISSAN : NI21200-G3100 SPRING - VALVE FOR NISSAN : NI13203-H1000 DISTRIBUTOR CAP FOR NISSAN : 22162-25G11
IN STOCK READY TO SHIP IN STOCK READY TO SHIP IN STOCK READY TO SHIP
SEAL - VALVE STEM FOR NISSAN : NI13207-H7200 DISTRIBUTOR CAP FOR NISSAN : 22162-78A10 GASKET - VALVE COVER FOR NISSAN : NI13270-H1000
IN STOCK READY TO SHIP SCREW DOWN
IN STOCK READY TO SHIP
IN STOCK READY TO SHIP
WIRE KIT - IGNITION FOR NISSAN : NI22450-L1600 GASKET - FRONT COVER FOR NISSAN : NI13520-05H00 VALVE - INTAKE FOR NISSAN : NI13201-H6200
IN STOCK READY TO SHIP IN STOCK READY TO SHIP IN STOCK READY TO SHIP
CHAIN - TIMING FOR NISSAN : NI13028-18001 VALVE - EXHAUST FOR NISSAN : NI13202-H6200 TENSIONER FOR NISSAN : NI13070-18001
IN STOCK READY TO SHIP IN STOCK READY TO SHIP IN STOCK READY TO SHIP
GASKET - INTAKE FOR NISSAN : NI14035-H8901 LINER FOR NISSAN : NI11012-H7200 GASKET - OIL PAN FOR NISSAN : NI11122-05H00
IN STOCK READY TO SHIP IN STOCK READY TO SHIP IN STOCK READY TO SHIP
GEAR - CRANK FOR NISSAN : NI13021-H8900 FAN BLADE FOR NISSAN : 21060-48210 GASKET - HEAD FOR NISSAN : NI11044-H9822
IN STOCK READY TO SHIP IN STOCK READY TO SHIP IN STOCK READY TO SHIP
SEAL - EXHAUST FOR NISSAN : NI12279-H1000 SEAL - OIL FOR NISSAN : NI13510-05H01 PISTON - STANDARD FOR NISSAN : NI12010-G3411
IN STOCK READY TO SHIP IN STOCK READY TO SHIP IN STOCK READY TO SHIP
PISTON - .50MM FOR NISSAN : NI12010-G3414 PISTON - .75MM FOR NISSAN : NI12010-G3415 PISTON - 1.00MM FOR NISSAN : NI12010-G3416
IN STOCK READY TO SHIP IN STOCK READY TO SHIP IN STOCK READY TO SHIP
   
 

Nissan A15 Engine Parts

Reading time: 04 min 36 sec.

Table of Contents

1. Summary
2. History of Nissan A15
3. Types of Nissan A15
4. Characteristics of Nissan A15
5. Choose Lift Parts Warehouse to buy Nissan A15 Engine Parts
6. Takeaways

Summary

Nissan has a massive line of engines that they have been manufacturing for decades, and they are very successful. One particular Nissan engine that improves over time is the Nissan A15 engine. Nissan has improved upon this engine dramatically since its creation, but it still holds to the design concept of an overhead camshaft valvetrain layout.

History of Nissan A15

The Nissan A15 engine was first introduced in 1982 as a 1.5L inline four-cylinder configuration with a base compression ratio of 8:1 and fuel injection standard across all models. This year also saw the release of vehicles that utilized this motor, such as the Nissan Sentra and Datsun Maxima.

Nissan continued producing this engine throughout the 1980s and even the early 1990s until 1993 when Nissan decided to swap the Nissan A15 engine and Nissan A10 and Nissan A12 motors. Nissan gave the Nissan A15 a few boosts in power over this period, but it remained very similar specs throughout its 20 years of production.

Nissan
Nissan A15 Engine

Types of Nissan A15

However, Nissan had some unforeseen hiccups with their switch of engines which led them to continue producing these motors long after they were due for replacement. Initially, Nissan released vehicles such as the Nissan Altima and Nissan Maxima utilizing two different types of Nissan A15s: one type was equipped with a turbocharger while the other was not.

Nissan soon realized that they needed to be more efficient in manufacturing and leading customers when allocating resources, so they stopped making two versions of their A15 engines. Nissan had more problems with their Nissan A10 and Nissan A12 line of motors, but that is another story for another time; Nissan continued producing the A15 engine until 2005, when Nissan discontinued it after they decided to make one unified Nissan motor across all of their vehicles (Nissan KA24E engine)

Characteristics of Nissan A15

The Nissan A15 engine has several features which distinguish it from other Nissan engines, some good and some bad. This is an overhead camshaft valvetrain layout like many other Nissan engines, which means that the distributor does not sit in between camshafts; instead, they are located on either side of the block along with the oil pump. The Nissan A15 also has a relatively high compression ratio at 8:1, which is not overly powerful. Still, Nissan did make the A15 engine turbocharged across all Nissan vehicles equipped with this engine.

The Nissan A15 is a great little engine; Nissan made very few improvements over its time of service to offer something different and stand out from other Nissan engines and produce an affordable product for many years. The Nissan A15 was initially meant to be replaced by the Nissan KA24E, but Nissan gave them life until 2005 instead of 1993 as expected due to hiccups with their switch in engines. The Nissan A15 offers good fuel economy, power, and reliability for many older models of cars, given that they are still producing these motors today, even if just for Nissan Z cars and Nissan 240sx models.

The Nissan A15 is one of Nissan's hidden gems. It has been since the beginning; Nissan still produces this motor for some newer Nissan models such as the Nissan Z cars and Nissan 240sx models today, as mentioned earlier. The Nissan A15 will continue to be manufactured by Nissan with very few changes. It became a fan favorite among many car enthusiasts due to its reliability and strong base power plant.

Nissan has continued to improve upon its Nissan A15 engines over the decades, but they were not dramatic enough to stand out from other Nissan engines as Nissan KA24E does. For example, this is another story for another, however, if you are looking for a Nissan engine that is still produced to this day and offers good reliability and base power, you should consider investing in a Nissan A15 as it will not let you down if Nissan has been producing them lately.

If you want to know about Nissan H20 Engine, click here.

Choose Lift Parts Warehouse to buy Nissan A15 Engine Parts

Lift Parts Warehouse is a website that specializes in providing its customers with the best quality Nissan forklift parts at low prices. The company has been selling auto, industrial and on-road parts for more than 10 years. It was founded by a team of highly skilled individuals who had many years of experience combined in all types of forklift parts.

Its main goal is to help customers find their desired replacement forklift parts fast and hassle-free. The only thing you require to get fast shipping on any part purchased through Lift Parts Warehouse is that you register as a site member. It is free, and it only takes a few minutes. Once you are done, you can start browsing through Nissan Forklift Engines. We have all parts of Nissan A15 Engine Parts.

Takeaways

  • Nissan has improved upon this engine dramatically since its creation, but it still holds to the design concept of an overhead camshaft valvetrain layout.

  • Nissan gave the Nissan A15 a few boosts in power over this period, but it remained very similar specs throughout its 20 years of production.
  • The Nissan A15 will continue to be manufactured by Nissan with very few changes.

Read More