Product Description

The T77482 right-hand steering arm is a high-quality replacement for John Deere Tractors. This steering arm connects the steering cylinder to the spindle, allowing for smooth and precise steering control. It is made of durable steel and coated with corrosion-resistant paint. If you are looking for a reliable and affordable steering arm for your John Deere Tractor, look no further than this T77482 RH Steering Arm from Lift Parts Warehouse.

Model Applications:	500C, 480C, 410D, 401D, 310B, 2755, 2750, 2555, 2355
Cross Reference Numbers:	T77482, T66938, T71745, T56516

Product Specifications

The T77482 right hand steering arm specifications are mentioned below.

Condition	New
Brand	Aftermarket
Part Type	Right Hand Steering Arm
Manufacturer Part Number	WN-T77482
Compatible Equipment Type	Tractor
Compatible Equipment Make	John Deere
Modified Item	No

Warranty Information

This T77482 steering arm comes with a 1-year warranty.

Applications

John Deere Tractors

Frequently Asked Questions

Q: Where can I buy the T77482 Right Hand Steering Arm?

A: You can buy this part from Lift Parts Warehouse's online store. You can also call our customer service at 1-800-210-8170 for assistance.

Q: How do I install the T77482 RH steering arm?

A: To install this steering arm, you will need some tools and equipment, such as a jack, a wrench, a hammer, a screwdriver, and a grease gun. You will also need to follow these steps:

Park the tractor on a level surface and turn off the engine. Apply the parking brake and disconnect the battery.
Raise the tractor's front end with the jack and support it with jack stands. Remove the front wheel on the right side.
Locate the old steering arm and remove the cotter pin and nut that secure it to the steering knuckle. Use a hammer and a screwdriver to tap out the tapered pin that holds the arm in place.
Remove the bolt and nut that connect the old steering arm to the drag link. Pull out the old steering arm and discard it.
Align the new steering arm with the steering knuckle and insert the tapered pin. Secure it with a new cotter pin and nut. Tighten the nut to the specified torque.
Connect the new steering arm to the drag link with a new bolt and nut. Tighten them to the specified torque.
Grease the steering arm and drag link fittings with a grease gun.
Reinstall the front wheel and lower the tractor. Reconnect the battery and start the engine. Check for proper steering operation and alignment.

Q: How do I know if I need to replace this Steering Arm?

A: Some signs that you may need to replace the arm are excessive play or looseness in the steering wheel, difficulty turning or steering the tractor, uneven or excessive tire wear, or damage to the arm itself. If you notice any of these symptoms, you should inspect the arm and replace it if necessary.

Need More Parts? More Parts From Lift Parts Warehouse

If you need more products from this category, we have here a large collection of:

At Lift Parts Warehouse, we carry many high-quality replacement parts to keep your tractor parts in top condition. Browse our John Deere Tractor Parts Catalog here. If you need help finding the right part for your tractor, our expert customer service team is here to assist you at 1.800.210.8170. Shop now and experience the Lift Parts Warehouse difference.

Arm, Steering, Right Hand: T56516, T71745, T66938, T77482 For John Deere

Customer Reviews

Questions & Answers

SELLER REVIEWS