The Benefits of a New Hyster Forklift Radiator: How to Measure and Replace it?
Reading time: 3 min 53 sec.
A forklift radiator is a part of the machine which dissipates some of the heat wasted during energy conversion. There are thousands of different types on the market, each one more versatile than the other. Hyster is an American corporation that manufactures and distributes material handling equipment such as lift trucks (forklifts), electric pallet jacks, electric stackers, and warehouse handling systems.
Hyster radiators are used in order to dissipate extra heat from the forklift engine. It is an essential part of any diesel forklift because it reduces the temperature of the forklift's powertrain. This, in turn, increases the durability of the forklift and its engine.
What are the benefits of using a new Hyster Forklift Radiator?
Hyster radiators will help you save money and time by reducing the frequency of machine failures due to overheating. So, it may even increase your productivity through improved machinery efficiency.
Transportation and heavy industry sectors will benefit the most from these forklift radiators because they need constant power provided by a reliable engine to perform their work correctly. A Hyster Forklift Radiator, when used correctly, will improve the efficiency of the work you do with your forklift. Below are some benefits to take into consideration:
Improved fuel economy
Better engine performance
The longer life expectancy of the forklift's engine components
How to correctly measure a radiator for replacement
Forklift owners often replace forklift radiators whenever they have the replacement part on their hands. However, it is important to remember that there are two ways of measuring a radiator for replacement. One way is to measure the physical dimensions of the radiator unit itself. The other one is to determine the engine displacement or powertrain size of the vehicle in question. As an important note, always ensure that your new radiator will have your old unit's same or higher cooling capacity.
The physical measurements of a forklift radiator are given in inches or millimeters for metric types, depending on the country where the unit is used. Regardless of powertrain size and engine displacement, radiation dimensions remain unchanged because it mainly depends on physical measurements, not the engine. If you are planning to get rid of the old radiator and get a new one, it is best to go for the dimensions instead of engine displacement or powertrain size.
The dimensions can be easily found on the internet with just a few information as the forklift model and type. Alternatively, you can also check out forklift handbooks to find the same information. Our professional Lift Parts Warehouse staff can help you choose the Hyster radiator with the correct dimensions for your forklift model.
How to replace a forklift radiator
Replacing a forklift radiator is easy if you know what you are doing. It can also be quite dangerous, especially if you do not have any experience with that type of vehicle or its engine. To avoid future failures, it is important to check out all specifications before buying or replacing the unit into your Forklift Cooling System.
Replacing a radiator for a forklift requires the use of certain tools, including wrenches and screwdrivers. It is important to remember that it can be quite dangerous if performed incorrectly, so always follow safety guidelines when replacing the part. If you are planning to replace your old Hyster radiator with a new unit, it is best to check out all the below tips in order to get an idea of how it is done.
Tools needed for the replacement:
Ratchet set, including various extensions and wrenches (sockets)
A coolant draining container can also be helpful if you want to catch all coolant drained out of the system during this process. It must then be disposed of in an appropriate recycling unit.
Consider that bolts might get hot, so protective gloves are also recommended.
The rest of the procedure should go like any other standard replacement process without any complications. The information provided below will guide you through all the removal and installation procedures. Follow all safety guidelines and wear protective gloves for your hands.
Step for forklift radiator replacement:
Open the drain valve and let all coolant out of the radiator. Make sure you have a container below to catch it as it comes out. Otherwise, it will just leak onto the floor.
Remove the fan and caps by removing the screws that hold them in place. You can remove all bolts that connect it to the rest of the components on your forklift and pull out the entire assembly.
You will then need to disconnect the cooling lines attached to the radiator. Be careful when doing this because there might be some pressurized coolant left in the system.
Take out the radiator by removing all bolts that secure it to the frame.
Replace it with a new unit, following all safety measures. Replace any components you had previously removed and tighten all bolts once done
Refill with clean coolant after refitting everything back together.
Adjust the fan and caps to fit accordingly and secure them in place with screws and bolts.
Finally, connect all necessary components (radiator, lines) and check if everything is working alright before putting back the assembly into your forklift.
Find Hyster Forklift Radiator parts at Lift Parts Warehouse
This online forklift parts store ships to all the U.S. states located across North America from its multiple shipping points. We have many years of experience providing quality replacement Hyster forklift parts to customers worldwide. Our website contains information about our warehouse, customer service, shipping information, etc., but our vast inventory is one of the most important sections.