TCM Forklift FG25N5 Parts

Table of Contents

Summary

If you own or operate a TCM Forklift FG25N5, you know how reliable and efficient it is. But like any machine, it needs regular maintenance and replacement of worn-out parts to keep it running smoothly. This article will comprehensively overview the TCM Forklift FG25N5 parts, benefits, and features.

The TCM Forklift FG25N5 has an engine, a hydrostatic transmission, and a hydraulic power steering system. It also features a spacious operator's compartment, an LCD display, and a safety system with a seat belt and parking brake.

Parts of TCM Forklift FG25N5

Here are some parts of TCM Forklift FG25N5 that you should know:

Spark plugs

These are the devices that ignite the fuel-air mixture in the engine cylinders. They need to be replaced periodically to ensure optimal performance and fuel efficiency.

Hoses

These tubes carry coolant, oil, and hydraulic fluid throughout the forklift. They must be checked regularly for leaks, cracks, or wear and tear.

Air filter

This is the part that cleans the air that enters the engine. It prevents dust, dirt, and debris from damaging the engine components. It needs to be cleaned or replaced when it gets clogged or dirty.

Oil filter

This is the part that filters the oil that lubricates the engine. It removes impurities and contaminants from the oil to protect the engine from wear and tear. It needs to be changed along with the oil at regular intervals.

Fuel filter

This is the part that filters the fuel that powers the engine. It removes water, dirt, and rust from the fuel to prevent clogging or damage to the fuel injectors. It needs to be replaced when it gets dirty or clogged.

Alternator

This part generates electrical power from the engine rotation. It charges the battery and supplies power to the electrical systems of the forklift. It needs to be checked for proper output and voltage regulation.

Starter

This part turns the engine over when you turn the key or push the button. It uses electrical power from the battery to spin the flywheel and crankshaft. It needs to be tested for proper operation and current draw.

Radiator

This part cools down the engine by transferring heat from the coolant to the air. It consists of a core, a fan, and a cap. It must be filled with adequate coolant and checked for leaks or blockages.

Hydraulic pump

This part creates hydraulic pressure for operating the mast, forks, and tilt cylinders. It uses hydraulic fluid from a reservoir and delivers it to the valves and hoses. It needs to be inspected for leaks, noise, or pressure loss.

Benefits

The TCM Forklift FG25N5 offers many benefits to its users, such as:

High performance

The TCM Forklift FG25N5 can easily handle heavy loads thanks to its powerful engine, transmission, and mast. It can also maneuver in tight spaces with its compact design and small turning radius.

Low maintenance

It has simple and robust components that require minimal maintenance and repair. It also has easy access to all parts for inspection and service.

Safety

It has a safety system includes a seat belt, a parking brake, an operator presence sensor, an overload warning system, and an emergency stop button. It also has a sturdy frame and a counterweight that provide stability and prevents tipping over.

Comfort

A spacious operator's compartment provides ample legroom, headroom, and visibility. It also has an ergonomic seat, steering wheel, pedals, levers, switches, and buttons that reduce fatigue and enhance productivity.

Features

The TCM Forklift FG25N5 has many features that make it stand out from other forklifts, such as:

LCD Display

The LCD display shows information about the forklift's status and operation, such as speed, fuel level, engine temperature, oil pressure, battery voltage, hour meter, fault codes, etc. It also has backlighting for better visibility in low-light conditions.

Side Shift

The side shift is an attachment that allows the forks to move sideways without moving the whole forklift. This enables the operator to align the forks with the load more easily and accurately.

Solid Tires

Solid tires are rubber resistant to punctures, cuts, abrasions, and wear. They also have deep tread patterns that provide traction and stability on various surfaces.

LED Lights

The LED lights are energy-efficient and long-lasting lights illuminating the forklift's front and rear. They also have indicators and brake lights that signal the forklift's movement and intention to other workers and vehicles.

Choose Lift Parts Warehouse as your supplier of TCM Forklift FG25N5 Parts.

Lift Parts Warehouse is your one-stop shop for all your TCM Forklift FG25N5 Parts needs. We offer:

• A wide selection of genuine and aftermarket parts for your TCM Forklift FG25N5, covering all the main components and accessories.

• A competitive pricing policy that guarantees you the best value for your money without compromising quality or durability.

• A fast and reliable shipping service that delivers your parts to your doorstep in no time, anywhere in the US.

• A friendly and knowledgeable customer service team is ready to assist you with any questions or issues regarding your order or parts.

• A hassle-free return policy that allows you to exchange or refund your parts within 30 days of purchase if unsatisfied.

Takeaways

• The TCM Forklift FG25N5 parts offer high performance, low maintenance, easy operation, safety, fuel efficiency, environmental friendliness, and customizability.

• Lift Parts Warehouse is the best choice for your TCM Forklift FG25N5 parts because we have a huge inventory of high-quality and affordable parts, fast and free shipping, a 30-day return policy, a one-year warranty, and technical support.

• To order your forklift parts from Lift Parts Warehouse, visit our website or call us today.