Like most forklifts, Mitsubishi lift trucks make use of different hydraulic cylinders to control and move their loads. The tilt cylinders are the ones that stick out on both sides on the front side of many three and four wheel Mitsubishi forklift models. These cylinders are robust hydraulic cylinders that were built to withstand heavy efforts, but even so, they are not exempt from suffering wear or being damaged. They play an essential role in the stability of the forklift loads. That's why it's crucial to judge when it's the right moment to replace them. With that in mind, at Lift Part Warehouse, we want to share a little more about Mitsubishi forklift tilt cylinders and what considerations anyone should have when purchasing their replacements.
What is a Mitsubishi Forklift Tilt Cylinder?
Mitsubishi forklift tilt cylinders are double-acting hydraulic cylinders, which means they can push and pull their arms to handle their loads more easily. You can find them connected to the left and right stationary rails of the upright assembly to the frame of most three-and four-wheel Mitsubishi forklift truck models.
Mitsubishi tilt cylinders help stabilize the loads that these forklift vehicles handle. They keep the loads closer to the forklift's pivot point which prevents the weight of the load from causing the vehicle to tilt forward.
They are an essential element to safely handle loads in different types of scenarios, especially when these vehicles are driven on uneven ground or over a slope. This stability helps reduce the chance that a tipping over occurs.
What are the Major Parts of a Mitsubishi Forklift Tilt Cylinder?
Mitsubishi forklift tilt cylinders share the same elements that make up most double-acting hydraulic cylinders. Here we sumire and describe these major parts:
Rod. It’s the part of every Mitsubishi forklift tilt cylinder which extends or retracts when the piston moves. One of its end it’s connected to the piston, and the other one with a clevis that allows the tilt cylinder to be attached to the upright assembly.
Head. It is the tilt cylinder part from where the rod comes out when the piston moves. It has the function of serving as an upper stop for the piston and contains the seals that prevent leaks when the rod moves.
Barrel. The barrel is the main section of every Mitsubishi forklift tilt cylinder. The piston, seals, and hydraulic fluid stay inside the barrel. The barrel is a typically cast iron or steel cylinder that can withstand high pressure levels.
Piston. It is a sliding piece attached to the inside end of the cylinder rod. This part separates the inner section of the barrel into two chambers. It moves linearly from the top of one barrel to another when the internal pressure of one of the chambers varies.
Cap. It’s the bottom part or base of any Mitsubishi forklift tilt cylinder. It serves as a base stop for the piston and allows the hydraulic cylinder to be attached to the forklift’s frame.
Seals. Every Mitsubishi forklift tilt cylinder counts on seals in its piston and head. The piston seals keep the pressure difference between the internal barrel chambers stable. Meanwhile, the seals in the head prevent leaks when the rod moves and keep dust and other contaminants from getting in.
How Does a Mitsubishi Forklift Lift Cylinder Work?
A Mitsubishi forklift tilt cylinder uses pressurized fluid to move the piston inside its barrel. The piston is attached to a rod, the end of which is connected to the forklift's mast.
Tilt cylinders are double-acting hydraulic cylinders, which means that inside the cylinder body, the piston is an actuator that moves when the pressure difference between both chambers. Depending on the differential pressure between both chambers, the cylinder rod moves the loads closer or further from the vehicle's pivot point.
The entire ability of tilt cylinders to control and handle large forces is due to Pascal's hydraulic principle. Pascal's law states that when an external force is applied to an incompressible fluid in a container, the pressure changes are transmitted throughout the fluid without any loss. This means that heavy weights can be handled with little effort as long as the container can withstand the fluid pressure surges.
Watch this video to learn more about how most hydraulic cylinder work:
How Do You Know If a Mitsubishi Forklift Tilt Cylinder is Bad?
Mitsubishi forklift tilt cylinders are robust, durable hydraulic cylinders built to withstand high efforts. However, they can suffer irreversible damage if they are not properly maintained.
A faulty Mitsubishi forklift tilt cylinder must be replaced before it becomes a source of risk to both the lift truck's driver and those people nearby. That's why it is crucial to recognize when the first signs of failure appear. Below we will summarize the major symptoms that tell us when a Mitsubishi tilt cylinder is bad:
The Mitsubishi forklift tilt cylinder’s piston rod is scored, corroded, or buckled.
A crack appears on one of their parts.
The cylinder body is scored.
Cylinder seals wear constantly.
Fluid leaks persist despite replacing their seals.
Their clevis ends are deformed or damaged.
Find the Best Mitsubishi Forklift Tilt Cylinder Replacements at Lift Parts Warehouse
If you need a replacement for one or more Mitsubishi forklift tilt cylinders, Lift Parts Warehouse is the best place to find them. We have a wide catalog of tilt cylinders that are compatible with many Mitsubishi forklift models. So, we guarantee that you will find the Mitsubishi forklift tilt cylinder that best suits your needs.
Lift Parts Warehouse is your one-stop shop for the best prices on Mitsubishi forklift parts. And if you didn't know already, each of our products comes with a one-year guarantee.
Plus, we offer an excellent shipping service that will send your order to you within a few days. And if your order is more than 650 dollars, shipping is free. If for any reason you are not satisfied with what you received, you can return it and ask for a refund. For more information about our return policy, click here.
We are one of the best lift truck replacement distributors in the United States. We can assure you that our products will keep your forklift performing at its best for a long time to come. So give us the opportunity and let our work speak for itself, you won't regret it.
Mitsubishi Forklift Tilt Cylinders help control and stabilize loads handled by Mitsubishi Forklift Trucks. If they don't perform their duties as they should, there is a chance that a Mitsubishi forklift truck could tip over or lean forward, putting both the driver and those around them at risk. These devices are highly resistant but not indestructible, just as any other component is subject to wear and tear. Don't hesitate to contact Lift Parts Warehouse services when you need a new tilt cylinder for your Mitsubishi forklift. With our tilt cylinder assemblies, your Mitsubishi will be performing at its peak level once again.