1208-3314 36V 45A (Ww) Pm Motor Control

Product Description

The 1208-3314 (Ww) pm motor controller is a microprocessor-based device that regulates the speed and torque of permanent magnet motors. It has a wide operating voltage range of 24 to 36 volts and a maximum current output of 45 amps. It also has a built-in diagnostic LED, which indicates the status and fault codes of the controller. The controller is protected from overcurrent, overvoltage, undervoltage, overtemperature, and short-circuit conditions. It has a rugged aluminum housing that is water-resistant and dust-proof.

Cross Reference:

CL7007994, CT1208-3314, PHAX00001556, 7007994, 1208-3314, AX00001556.

Technical Manual: 1208 Manual

1208-3314 36V 45A (Ww) Pm Motor Control

Product Specifications

The specifications of this motor controller are mentioned below.

Features and Benefits

The 1208-3314 pm motor controller offers several features and benefits that make it an ideal choice for your electric vehicle. Some of them are:

• Smooth and precise control of permanent magnet motors, which are more efficient and durable than other motors.

• Programmable throttle input allows you to customize the controller to match your vehicle's throttle signal and performance requirements.

• Diagnostic LED helps you troubleshoot any issues with the controller and identify the fault codes.

• Protection from various electrical faults ensures the controller and motor's safety and longevity.

• Water-resistant and dust-proof housing protects the controller from harsh environmental conditions.

• Easy installation and operation saves you time and hassle.

Applications

The 1208-3314 36V 45A pm motor controller can be used for electric vehicles.

Electric Vehicle

Warranty Information

The 1208-3314 pm motor controller comes with a 6-month warranty, upgradable for up to 36 months. All remanufactured and rebuilt items are subject to a core charge. The core charge is refundable. The refund amount will be determined by the status of the core returned.

Not Sure Will This Part Fits Your Equipment?

If you are not sure whether this motor controller is compatible with your electric vehicle or not, don't worry. We are here to help you find the right part for your needs. You can contact us through any of our channels:

• Phone number: 1.800.210.8170

• Email: [email protected]

• Contact form: https://www.liftpartswarehouse.com/articles.asp?id=83

• Live chat

Our friendly and knowledgeable staff will assist you with any questions or concerns you may have. We will also guide you through ordering and shipping the product to your location.

Frequently Asked Questions & Answers

Q: How do I read the diagnostic LED of the controller?

A: The diagnostic LED of the controller is located on the front panel. It indicates the status and fault codes of the controller. The LED can be either green, red, or flashing. A green LED means that the controller is operating normally. A red LED means that there is a fault in the controller. A flashing LED means that the controller is in programming mode. The number and duration of flashes indicate the specific fault code.

Q: How do I reset the controller after a fault?

A: To reset the controller after a fault, you need to turn off the power to the controller and wait for 10 seconds. Then, turn on the power again and check if the fault is cleared. If the fault persists, you need to contact us for further assistance.

Q: How do I test the controller and the motor?

A: To test the controller and the motor, you need to connect them according to the wiring diagram provided in the user manual. Then, apply power to the controller and check if the motor runs smoothly and responds to the throttle input. You can also use a multimeter to measure the voltage and current output of the controller.

Q: How do I install the controller in my electric vehicle?

A: To install the controller in your electric vehicle, you need to follow these steps:

• Disconnect the battery from the vehicle and secure it from accidental contact.

• Locate a suitable place for mounting the controller, preferably away from heat sources and moisture.

• Use the mounting holes on the controller to drill holes on the mounting surface.

• Secure the controller to the mounting surface using bolts and washers (not included).

• Connect the wiring harness to the controller according to the wiring diagram provided in the user manual.

• Connect the battery to the vehicle and turn on the power.

• Test the controller and the motor as described above.

Frequently Bought Together

If you are interested in buying this motor controller, you might also want to consider buying some other products that are frequently bought together. Some of them are:

• 1208C-3404 36V 60A (Ww) Pm Motor Control

• 1208C-3402 36V 45A (Ww) Pm Motor Control

• 1208C-2411 24V 70A (Ww) Pm Motor Control

You can find these products on our website, Lift Parts Warehouse, where we offer high-quality parts for electric vehicles at competitive prices. We also offer fast and free shipping on orders over $650. Shop with us today and enjoy our excellent customer service and satisfaction guarantee.