1208-2455 24V 55A (Ww) Pm Motor Control

Product Description

The 1208-2455 24V 55A (Ww) pm motor controller is a microprocessor-based device that regulates the speed and torque of permanent magnet motors. It also features a built-in diagnostic system that monitors the motor's and the controller's status and protects them from overcurrent, overvoltage, undervoltage, overtemperature, and short circuits. The controller has a rugged and compact design, with a sealed enclosure that meets IP65 water and dust resistance standards. It also has a plug-and-play wiring harness that simplifies the installation and maintenance.

Cross Reference:

CL7007984, CT1208-2455, HU1674661R, PHAX00001546, YP5243070-07R, 7007984, 1208-2455, 1674661R, AX00001546, 5243070-07R.

Technical Manual: 1208 Manual

1208-2455 24V 55A (Ww) Pm Motor Control

Product Specifications

The 1208-2455 pm motor controller has the following specifications:

Features and Benefits

The 1208-2455 24V 55A (Ww) Pm motor controller offers the following features and benefits:

High-frequency operation

The controller operates at a frequency of 15 kHz, which reduces the noise and improves the efficiency of the motor.

Smooth acceleration and deceleration

The controller provides smooth and precise motor speed and torque control, ensuring a comfortable and safe ride.

Programmable parameters

The controller can be programmed using the Curtis handheld programmer or PC software, allowing you to customize the performance and behavior of your vehicle.

Diagnostic capabilities

The controller has LED indicators and fault codes that help you troubleshoot and monitor the status of the system.

Durable and compact design

The controller is built with rugged components and sealed in a plastic enclosure, making it resistant to water, dust, vibration, and shock. It also has a compact size that fits easily in tight spaces.

Applications

The 1208-2455 pm motor controller can be used for electric vehicles.

Electric Vehicle

Warranty Information

This 1208-2455 motor controller comes with a 6-month warranty, upgradable for up to 36 months. All remanufactured and rebuilt items are subject to a core charge. The core charge is refundable. The refund amount will be determined by the status of the core returned.

Not Sure Will This Part Fits Your Equipment?

If you are not sure whether this part will fit your equipment or not, don't worry. We are here to help you. You can contact us through any of our channels:

• Phone number: 1.800.210.8170

• Email: [email protected]

• Contact form: https://www.liftpartswarehouse.com/articles.asp?id=83

• Live chat: Available on our website

Our friendly and knowledgeable staff will assist you with any questions or concerns you may have. We will also provide you with a free quote and a fast delivery service.

Frequently Asked Questions & Answers

Q: How do I program the controller?

A: You can program the controller using the Curtis handheld programmer (model 1313 or 1314) or PC software (model 1311). You must connect the programmer to the controller using cable (model 1309). You can then access the menu and change the parameters according to your preferences.

Q: How do I reset the controller?

A: You can reset the controller by turning off the power supply and waiting for a few seconds. Then turn on the power supply again and check if the controller is working properly.

Q: How do I read the fault codes?

A: You can read the fault codes by looking at the LED indicators on the controller. There are two LEDs: red and green. The red LED indicates a fault condition, while the green LED indicates a normal condition. The fault codes are displayed by the number and pattern of flashes of the red LED. You can refer to the manual for the meaning of each fault code.

Q: How do I test the controller?

A: You can test the controller by connecting it to a motor and a battery and using a multimeter to measure the voltage and current. You can also use a tachometer to measure the motor speed. You can compare the readings with the expected values and check for any discrepancies.

Q: How do I troubleshoot the controller?

A: You can troubleshoot the controller by following these steps:

• Check the wiring and connections for any loose or damaged parts.

• Check the battery voltage and state of charge.

• Check the throttle input and output signals.

• Check the motor resistance and continuity.

• Check the controller settings and parameters.

• Check the fault codes and LED indicators.

• Contact us if you need further assistance.

Frequently Bought Together

You may also be interested in these products that are frequently bought together with the 1208-2455 motor controller:

• 1208C-3404 36V 60A (Ww) Pm Motor Control

• 1208C-3402 36V 45A (Ww) Pm Motor Control

• 1208C-2415 24V 70A (Ww) Pm Motor Control