Home > ELECTRICAL > DELTA-Q > BATTERY CHARGER >

913-3610-T3 36V Charger With SB50 Output Connector
913-3610-T3 36V Charger With SB50 Output Connection
 
Our Price: $269.66




Check compatibility. Ask our experts.
Part Number:
913-3610-T3


Condition*:
Repair Service ($269.66)


Save Time: Bulk Order Form Click Here!


Qty:
 
Description
 

913-3610-T3 36V Charger With SB50 Output Connection

Category: Battery Charger

Product Description

This is a Battery Charger for Electric Vehicles with Parts Number: 913-3610-T3.


Application: Applicable to 36 Volt pallet jacks, scissor lifts, floor scrubbers, floor burnishers.

Product Specifications

Specifications of the 913-3610-T3 Battery Charger:


Parts Type Master Brake Cylinder
Brand Aftermarket
Condition New
Fitment Direct Replacement
DC Output Voltage - nominal 36V
DC Output Voltage - maximum 51V
DC Output Current - maximum 21A
DC Output Power - maximum 875W
Interlock Current - maximum 1A
AC Input Voltage - Range 85 - 265 VAC
AC Input Voltage - Nominal 120 VAC / 230 VAC rms
AC Input Frequency 45 - 65 Hz
AC Input Current - maximum/nominal 12 A / 9.5 A rms @ 120 VAC or 5 A rms @ 230 VAC
AC Power Factor - nominal > 0.99 @ 120 VAC / > 0.98 @ 230 VAC
Dimensions 28.0 x 24.6 x 11.0 cm (11 x 9.7 x 4.3”)
Weight < 11 lbs
Enclosure IP66 (NEMA4)
Operating Temperature -30°C to +50°C (-22°F to 122°F)
Storage Temperature -40°C to +70°C (-40°F to 158°F)

Delta-Q 913-3610-T3 36V Charger

The Delta Q 913-3610-T3 Charger is an aftermarket battery charger for 36 Volt pallet jack, scissor lift, floor scrubber, floor burnisher, with the Grey SB50 Plug connector. This battery charger can be used for both on-board and off-board charging solutions.


An image of a 913-3610-T3 Battery Charger

Figure: 913-3610-T3 Delta-Q Charger1


An image of the dimension of Delta Q 913-3610-T3 Charger

Figure: Dimensions of the Delta-Q 913-3610-T3 36V Charger

Special Feature of 913-3610-T3 36V Charger


  1. Battery temperature monitoring
  2. External Communication
  3. Field-programmable with PC software
  4. Integrated charge cycle and event tracking with advanced microprocessor
  5. Short-circuit protection
  6. Reverse polarity protection
  7. Dust and water-jet protection with IP66 standard

LED Indicators for 913-3610-T3 36V Charger


AC ON Solid YELLOW AC LED
>80% Charge Indicator Solid YELLOW Charge LED
100% Charge Indicator Solid GREEN Finish LED
Fault Indicator Flash RED Fault LED
DC Ammeter LED Bargraph (6 level)
Long-term Storage Mode Auto-restart if battery voltage < 2.1 V/cell or 30 days elapse

Operating Instructions


  1. Extension cords must be 3-wire cords no longer than 30m(100’) at 10AWG or 7.5m(25’) at 16AWG per UL guidelines.
  2. Only connect ONE QuiQ charger to a single 15A circuit or the circuit may become overloaded.
  3. Charger enclosure may be hot during charging. Use hand protection if handling the charger while charging.
  4. Charger 10-LED Display:


An image of a LED Indicator Chart for 913-3610-T3 Battery Charger

Figure: LED Indicators for 913-3610-T3 36V Charger

Warranty Information

The 913-3610-T3 36V Charger comes with a 6-Months Warranty, extendable up to 36-Months.

Frequently Asked Questions

Is this a rebuilt battery charger?

Yes, it is a rebuilt battery charger.

Which vehicles can use this charger?

Any 36V electric vehicle such as pallet jacks, scissor lifts, floor scrubbers, and floor burnishers can utilize this.

What is the input current frequency range?

This charger has an AC input range of 45-65 Hz

Is this charger IP66 certified?

Yes, this is IP66 certified, which means it can withstand strong jets of water from any direction and can be submerged in water in a limited capacity. It is also fully dustproof.

Do I need to pay a core charge for the 913-3610-T3 36V Charger?

Yes, all remanufactured and rebuilt items are subject to a core charge. The core charge is refundable. The refund amount will be determined by the status of the core returned.

What is the Maximum DC Power Output?

This charger has a maximum DC Power Output of 875W.

Is this mountable?

Yes, this charger can be mounted and used on-board.

More Parts From Delta-Q

Apart from 913-3610-T3 36V Charger, if you need More Parts from Delta-Q, we have a huge collection of Delta-Q parts such as




Figure: A part of EZGO Parts Collection at Lift Parts Warehouse


Are you looking for something else? Please browse our Part Catalog here
. Lift Parts Warehouse provides quality aftermarket parts at a very reasonable price. All parts come with a limited 1 Year Warranty. We also guarantee a 100% fit for our parts.


1
The actual product may vary slightly in color and appearance. This image is for illustration purposes only.


Share your knowledge of this product. Be the first to write a review »