1212P-2502 24V 90A Permanent Magnet Drive Motor Controller
Category: Curtis Parts
Product Description
This is a Programmable PM (Permanent Magnet) Drive Motor Controller for battery-powered light-duty industrial vehicles with Parts Number: 1212P-2502.
Cross Reference:
CL7011418, CT1212P-2502, HU4135166R, PHAX00001022, YP550124674R, YP5501246-74R, 7011418, 4135166R, AX00001022, 550124674R, 5501246-74R
Application: The 1212P-2502 PM Drive Motor Controller is suitable for battery run low power industrial vehicles such as light-duty Class III pallet trucks, sweepers, scrubbers and other floor care machines, etc. Their programmability also makes them suitable for any low-powered permanent magnet motor applications like micro-scooters, mini-scooters, foldable scooters, and low-end personal mobility vehicles.
Product Specifications
Specifications of the 1212P-2502 PM Controller:
Part Category
|
Permanent Magnet Motor Controller
|
Condition |
New |
Brand
|
Miscellaneous
|
Nominal Voltage
|
24V
|
Drive Current, 20 Seconds
|
90A (10s)
|
Drive Current, 2 Minutes
|
50A
|
Drive Current, 1 Hour
|
20A
|
Minimum Motor Resistance
|
120 mΩ
|
B+, B- Logic Pin Current (max.)
|
9 A (pins 7 and 13 on 14-pin connector)
|
KSI Input Current (typical)
|
80 mA
|
Logic Input Current (typical)
|
1 mA
|
Horn Output Current (max.)
|
15 mA
|
BDI Output Voltage (max.)
|
0-5V
|
BDI Output Resistance (max.)
|
10 kΩ
|
LED Output Current (max.)
|
15 mA
|
Electromagnetic Brake Coil Resistance (min.)
|
32 Ω
|
PWM Operating Frequency
|
15.6 kHz
|
Electrical Isolation to Heatsink (min.)
|
500 VAC
|
Heatsink Overtemperature
|
Linear Cutback @ 80°C, Cutoff @ 105°C
|
Heatsink Undertemperature
|
Linear Cutback @ -10°C, 50% @ -25°C
|
Undervoltage Cutoff
|
14V
|
Overvoltage Cutoff
|
34V
|
Operating Temperature Range
|
-25°C to 50°C
|
Storage Temperature Range
|
-40°C to 65°C
|
Regulatory Compliance
|
EN 12184, EN 55022, IEC 61000-6-2 & -4-6, and ISO 7176
|
Environmental Protection
|
Electronics Sealed To IPX5
|
Dimensions
|
W72 x L131 x H39 mm
|
Weight
|
0.3 kg
|
1212P-2502 Permanent Magnet Drive Motor Controller
The 1212P-2502 Controller is a 24V 90A Permanent Magnet Motor Controller for lightweight industrial and personal applications. It is a highly flexible and programmable controller and hence can be used with a wide range of applications. It is an update of the older 1212P-2501 controllers. It is optimized for 3-wheel and 4-wheel mobility aid scooters but can be programmed to use on any low-power permanent magnet motor applications. The 1212P-2502 Controller can be programmed via the Curtis 1313-4331 Handheld Programmer or 1314 PC Programming Station
Features of 1212P-2502 PM Motor Controller
- Easy installation & set-up
- Easily programmable with Curtis Model 1313 Handheld or 1314 PC Programming Station Software
- Compatible with industrial tiller handle wig-wag throttles
- Reverse beeping alerts bystanders
- Power Saver function prevents battery drainage when idle
- Battery discharge indicator output
- Advanced speed regulation maintains precise speed in all terrains and conditions
- Internal main relay provides secure power-off.
- Emergency stop function ensures immediate EM braking
- Industry standard Molex Mini-fit Jr. logic connectors with convenient 1/4” 6.35mm faston push-fit connectors
- Smooth control provided by linear current cutbacks
- Easy troubleshooting and diagnostics
- Anti-roll back/roll-forward function provides smooth and safe vehicle control on hills and ramps
Warranty Information
The 1212P-2502 PM Motor Controller comes with a 6-month warranty, upgradeable up to 36 months.
Frequently Asked Questions
Is this 1212P-2502 Controller a brand new part?
No, it is a remanufactured item.
Does it have a reverse alarm function?
Yes, this controller has a reverse beeper to alert bystanders.
What are the Voltage and Current Ratings of 1212P-2502 Controller?
24V and 90Amps
What is the environmental protection on this controller?
The electronics have an IPX5 rating.
What is the ideal application of this Controller?
Although this controller has been optimized to work on 3 and 4 wheels mobility aid scooters, it can be programmed to be used on any low-power application with permanent magnet motors.
Does it require a core charge?
Yes, all remanufactured and rebuilt items are subject to a core charge. A core charge is refundable. The refund amount will be determined by the status of the core returned.
More Parts From Curtis
If you need More Electrical Parts from Curtis, we have a huge collection of
- Curtis 36V Battery Fuel Gauge
- Curtis XLR & Molex Cable Assembly
- Curtis Club Car Handset Adapter Cable
- Curtis 24/36V Gauge
- Curtis 24/36V Battery Discharge Indicator (BDI)
- Curtis PM Controller
- Curtis E-Z-GO PDS Controller
- Curtis CLUB CAR ERIC Controller
- Curtis DCS Controller and many more!
Are you looking for something else? Please browse our Part Catalog here. Lift Parts Warehouse provides quality aftermarket parts at a very reasonable price. All parts come with a limited 1 Year Warranty. We also guarantee a 100% fit for our parts.