505136042 Lift Cylinder Seal Kit for Yale Forklifts
Product Description
The 505136042 Lift Cylinder Seal Kit is a high-quality replacement part for your Yale forklift. This kit contains all the necessary seals and o-rings to repair the lift cylinder. The lift cylinder raises and lowers the forks and can wear out over time due to friction and pressure. By replacing the seals and o-rings, you can restore the performance and safety of your lift cylinder and extend its lifespan. Order yours from Lift Parts Warehouse today and get your Yale forklift back in action.
SEAL KIT - LIFT CYLINDER (UPPER) FOR YALE FORKLIFT (FITS RH & LH CYLINDER ON TRIPLE STAGE MAST "SEE KITS"). CATEGORY: YALE FORKLIFT PARTS. THIS PART CAN ALSO BE FOUND UNDER THE FOLLOWING PART NUMBERS: 505136042 YT 505136042 YALE 505136042 YALE505136042 505136042.
Product Specifications
The specifications of the 505136042 lift cylinder seal kit are mentioned below.
Condition
|
New
|
Brand
|
Aftermarket
|
Part Type
|
Lift Cylinder Seal Kit
|
Manufacturer Part Number
|
YT5051360-42
|
Compatible Equipment Type
|
Forklift
|
Compatible Equipment Make
|
Yale
|
Modified Item
|
No
|
Warranty Information
This lift cylinder seal kit comes with a 1-year warranty.
Applications
Yale Forklifts
Model
|
Serial Prefix
|
Engine
|
Make
|
ERC030AF
|
-
|
ELECTRIC
|
YALE
|
ERC030AG
|
-
|
ELECTRIC
|
YALE
|
ERC030AH
|
-
|
ELECTRIC
|
YALE
|
ERC030BG
|
-
|
ELECTRIC
|
YALE
|
ERC040AH
|
-
|
ELECTRIC
|
YALE
|
ERC040BG
|
-
|
ELECTRIC
|
YALE
|
ERC040TFN
|
-
|
ELECTRIC
|
YALE
|
ERC035TFN
|
-
|
ELECTRIC
|
YALE
|
ERC040AF
|
-
|
ELECTRIC
|
YALE
|
ERC040AG
|
-
|
ELECTRIC
|
YALE
|
Frequently Asked Questions
Q: How do I install the lift cylinder seal kit?
A: To install the lift cylinder seal kit, you need to follow these steps:
Disconnect the battery and lower the forks to the ground.
Remove the hose fittings from the lift cylinder and drain the hydraulic fluid into a container.
Loosen the nuts and bolts that secure the lift cylinder to the mast and the carriage.
Carefully remove the lift cylinder from the forklift and place it on a workbench.
Remove the snap ring and the end cap from the lift cylinder.
Pull out the piston rod and the old seal kit from the lift cylinder.
Clean the inside of the lift cylinder with a rag and inspect it for any damage or wear.
Install the new seal kit on the piston rod according to the instructions provided with the kit.
Insert the piston rod and the new seal kit into the lift cylinder and secure it with the end cap and the snap ring.
Reinstall the lift cylinder on the forklift and reconnect the hose fittings.
Refill the hydraulic fluid and test the lift function.
Q: Where can I buy the 505136042 lift cylinder seal kit?
A: You can buy the 505136042 lift cylinder seal kit from our online store Lift Parts Warehouse. You can also contact our customer service team for more information or assistance.
Q: Why do I need the lift cylinder seal kit?
A: The lift cylinder seal kit is essential for maintaining the performance and safety of your Yale forklift. If the seals in the lift cylinder are leaking, cracked, or degraded, they can cause fluid loss, pressure drop, and cylinder malfunction. This can result in reduced lifting capacity, erratic fork movement, and potential damage to the forklift and the load.
Need More Parts? More Parts From Lift Parts Warehouse
If you need more products from this category, we have here a large collection of:
At Lift Parts Warehouse, we carry many high-quality replacement parts to keep your forklift parts in top condition. Browse our Yale ERC040AG Mast Parts Catalog here. If you need help finding the right part for your forklift, our expert customer service team is here to assist you at 1.800.210.8170. Shop now and experience the Lift Parts Warehouse difference.