Home > Makes > NISSAN > FILTERS > OIL FILTERS

New & Used Nissan Forklift Oil Filters in Stock!

Sort By:
Page of 1
OIL FILTER  NISSAN NI15208-31U0B Oil Filter For Nissan: 15208-31U0B

In Stock Ready To Ship

Our Price: $4.04
OIL FILTER  NISSAN NI20801-01361 Oil Filter For Nissan: 20801-01361 for TCM

In Stock Ready To Ship

Our Price: $4.04
OIL FILTER  NISSAN NI20801-01041 Oil Filter For Nissan: 20801-01041 for TCM

In Stock Ready To Ship

Our Price: $4.80
FILTER - OIL  NISSAN NI15209-J1800 Filter - Oil For Nissan: 15209-J1800

In Stock Ready To Ship

Our Price: $11.64
FILTER - OIL  NISSAN NI15209-J1800B Filter - Oil For Nissan: 15209-J1800B

In Stock Ready To Ship

Our Price: $11.88
FILTER - OIL  NISSAN NI20801-01441 Filter - Oil For Nissan: 20801-01441

In Stock Ready To Ship

Our Price: $43.54
   
 

Nissan Forklift Oil Filter: Genuine Filters for Engine Protection

Table of Contents

Summary
Nissan forklift oil filter
Nissan h20 forklift oil filter
Nissan 25 forklift oil filter
Nissan 30 forklift oil filter
Oil filter location in Nissan Forklifts
What kind of oil does a Nissan forklift use?
Can I use other oil filters in Nissan Forklifts?
How do I know if my Nissan oil filter needs replacement?
How to install a new oil filter in your Nissan forklift
Purchase Your New Nissan Forklift Oil Filter at Lift Parts Warehouse
Takeaways

Summary

Nissan forklifts are extensively utilized in various industries for lifting and transferring loads to different locations. Nevertheless, regular maintenance on these machines is crucial to ensure their efficiency and longevity. One vital element of Nissan forklift maintenance entails regular oil filter replacement.

This technical article discusses the Nissan forklift oil filter, covering diverse types of oil filters employed in Nissan forklifts, their location, and the step-by-step procedure for replacing them.

Nissan forklift oil filter

The Nissan forklift oil filter serves to protect the engine against damage by removing impurities from the oil. Based on the intended use and model, Nissan offers three different types of oil filters: spin-on, cartridge, and magnetic. The spin-on type is the most commonly used filter, while the cartridge type replaces only the filter element. On the other hand, the magnetic type traps metallic particles through a magnet to avoid their circulation in the engine.

Nissan
Nissan forklift oil filter

Nissan H20 forklift oil filter

The Nissan H20 engine is popular for powering many Nissan forklift models. Featuring a four-cylinder design, this 2.0-liter gasoline engine boasts a maximum output of 60 horsepower.

As for the oil filtration system, the H20 engine employs a spin-on type oil filter, which is effortlessly replaceable by screwing it onto the engine block. This oil filter functions to filter out impurities and debris from the engine oil to provide superior protection against the detrimental effects of engine wear and tear.

Nissan 25 forklift oil filter

The Nissan 25 forklift is driven by either a K21 or K25 engine. These gasoline engines are four-cylinder, 2.1-liter engines with a maximum output of 57 horsepower. Similar to the H20 engine oil filter, the Nissan 25 forklift oil filter is of the spin-on type. The oil filter is situated alongside the engine block, proximal to the oil pan, and requires easy screwing for effortless installation and replacement.

Nissan 30 forklift oil filter

The Nissan 30 forklift, designed to handle heavier loads, is powered by the Nissan H20-II engine. This gasoline engine features four cylinders and has a displacement of 2.0 liters, boasting a remarkable output of up to 68 horsepower. Similarly to the Nissan 25 forklift, the Nissan 30 forklift also employs a spin-on type oil filter located adjacent to the engine block. The placement of the oil filter on the side of the engine block provides easier accessibility for timely maintenance and replacement.

Oil filter location in Nissan forklifts

The location of the oil filter in Nissan forklifts is highly contingent on the engine model in use. The oil filter for the Nissan H20 engine is located on the side of the engine block, whereas in the Nissan K21 and K25 engines, it is sited on the engine block's side, in close to the oil pan.

Therefore, it is essential to refer to the forklift owner's manual to ascertain the precise location of the oil filter and ensure that it is appropriately replaced to prevent any potential engine damage.

What kind of oil does a Nissan forklift use?

Selecting the appropriate oil for a Nissan forklift relies on the engine's make and the operating conditions that it is subjected to. For accurate identification of the correct oil type and viscosity for a particular engine, the forklift owner's manual should be referenced. Generally, 10W-30 or 15W-40 high-grade motor oil is used in Nissan forklifts.

Can I use other oil filters in Nissan forklifts?

Utilizing oil filters that are not manufactured by Nissan may result in inadequate engine performance and durability for Nissan forklifts. These filters are not engineered to fit the specific engine and provide the necessary filtration for protecting against hazardous contaminants. It is crucial to adhere to the use of OEM oil filters to guarantee optimal functionality and endurance of the engine.

How do I know if my Nissan oil filter needs replacement?

The oil filter in a Nissan forklift should be replaced according to the manufacturer’s recommended schedule, typically every 250 hours of operation or every three months, whichever comes first. However, if the forklift is used in harsh conditions, the oil filter may need to be replaced more frequently. Signs that the oil filter needs replacement include reduced engine performance, decreased fuel efficiency, and dark, dirty oil.

How to install a new oil filter in your Nissan forklift

Replacing the oil filter in a Nissan forklift is a relatively simple process that can be completed with basic tools. Here are the steps to follow:

  • Park the forklift on a level surface and turn off the engine.

  • Locate the oil filter and use an oil filter wrench to loosen the filter by turning it counterclockwise. Be careful not to damage the filter or the engine block.

  • Once the filter is loose, use your hand to unscrew it the rest of the way and remove it from the engine block.

  • Use a clean cloth to clean the mounting surface where the new filter will be installed.

  • Apply a thin layer of clean engine oil to the rubber gasket on the new filter.
  • Screw the new filter onto the engine block by hand, turning it clockwise until it is snug.

  • Use the oil filter wrench to tighten the filter an additional 1/2 to 3/4 turn.

  • Check the oil level and add oil if necessary.

  • Start the engine and check for leaks around the new filter.

  • Dispose of the old oil filter properly.

Purchase Your New Nissan Forklift Oil Filter at Lift Parts Warehouse

At Lift Parts Warehouse, we offer a wide selection of OEM oil filters for Nissan forklifts. Our oil filters are designed to fit your forklift’s engine perfectly and provide optimal filtration to protect your engine from contaminants. We also offer fast shipping and competitive pricing, making it easy and affordable to keep your forklift running smoothly.

Takeaways

Maintaining your Nissan forklift’s oil filter is crucial for ensuring the longevity and performance of your forklift’s engine. The oil filter should be replaced according to the manufacturer’s recommended schedule, and using OEM oil filters is highly recommended.

It is important to consult the owner’s manual to locate the oil filter and determine the correct oil type and viscosity for your forklift’s engine. Replacing the oil filter is a simple process that can be completed with basic tools, and Lift Parts Warehouse offers a wide selection of OEM oil filters for Nissan forklifts at competitive prices.

Read More