No matter what type of TCM forklift we are talking about, they all rely on a hydraulic pump to work well. This pump enables the TCM lift truck to easily and quickly handle its loads. These lift trucks would lose their purpose without an optimal TCM forklift hydraulic pump. These pumps are very reliable and designed to last a long time, but they eventually need to be replaced. That is why it is essential to know when to purchase a new TCM forklift hydraulic pump. To help you in this regard, Lift Parts Warehouse wants to share everything you need to know about these devices and what to consider when selecting a new replacement.
What is the Function of a TCM Forklift Hydraulic Pump?
TCM forklift hydraulic systems use pressurized fluid to create motion. Hydraulic fluid is stored in a reservoir tank which is then used to feed a TCM forklift hydraulic pump. This pump sends the pressurized fluid to the control valve that distributes the flow of fluid to the different hydraulic cylinders. The high fluid pressure is great enough to move both the main lift cylinder that manipulates the forklift's forks and the set of tilt cylinders that change the position of the mast to stabilize loads.
The hydraulic pump is the heart of the hydraulic system of any TCM forklift model
Almost all of the hydraulic pumps on TCM forklifts are gear-type rotary pumps. These pumps push fluid within a fixed volume, which increases the hydraulic pressure. This pressure provides the energy necessary to move the vehicle's hydraulic cylinder sets. To know how these hydraulic pumps work, we suggest you look at the following video:
How to Know if a TCM Forklift Hydraulic Pump is Faulty?
It is infrequent for a gear hydraulic pump to fail suddenly and unexpectedly. Generally, when a TCM forklift hydraulic pump begins to show failure signs, it is usually reflected in one way or another. If we keep an eye out for these symptoms, we can take corrective action right before the pump's failure starts to scale. This will help extend the device's lifespan and save you a lot of money in major repairs. Below we will highlight the most common signs or symptoms in Clark forklifts due to a faulty hydraulic pump.
You will notice when the forklift hydraulic pump start to fail
A grinding, whirring, or roaring sounds when the TCM forklift Hydraulic pump runs
It takes longer than usual to raise the hydraulic pressure
Exterior leaks
High temperature
If you see one or more of these symptoms in your hydraulic pump, it is best to have it checked by a specialist. If the repair costs more than 60% of the cost of a new one, then it is better to replace the pump.
Top Reasons a TCM Forklift Hydraulic Pump Fails
If your TCM forklift has a damaged hydraulic pump, avoid using it for as long as possible
Worn seals. Over time, the seals in the pump can wear out, causing leakage. This might make the lift truck's forks move more slowly or less responsively.
Mechanical fraccion. If the pump is not lubricated enough, the gears will rub against each other, raising their temperature considerably. This will accelerate both the deterioration of the seals and the gears themselves. The hydraulic fluid will also become contaminated, which will also compromise the rest of the components of the hydraulic system.
Air into the pump. If air gets into the pump for any reason, it can have a bad effect on the device. When the air bubbles collapse due to the high hydraulic pressure, it can damage the mechanical parts of the pump.
Improper seal installation. If the mechanical seals are not installed properly, the hydraulic fluid will leak. If the leak is bad enough, the hydraulic pressure will not be able to hold for very long. This means that the forklift's load capacity will be reduced.
A bad filter. You must replace the hydraulic filters every so often to avoid damaging the hydraulic pump on your TCM forklift. If a filter is worn out or clogged, it will ruin the internal parts of the hydraulic pump.
Do This Before Installing a New TCM Forklift Hydraulic Pump
Replace your TCM forklift hydraulic pump in the right way
There are a few tasks we suggest you do before you install your new TCM forklift hydraulic pump. To get the most out of your new pump and keep it running well for as long as possible, you must first:
Purge the hydraulic system
Looks for leak signs
Check out all the hydraulic connections
If possible, use a new hydraulic fluid
Change the hydraulic filter
We know that sounds like a lot of work, but with these instructions, you can guarantee that everything will go perfectly with your new hydraulic pump.
Get Your New TCM Forklift Hydraulic Pump at Lift Parts Warehouse
If the time has come to replace the hydraulic pump on your TCM forklift, the best thing you can do is purchase a new replacement from Lift Part Warehouse. We carry a wide selection of hydraulic pumps compatible with many TCM forklift models, so you're sure to find the perfect pump for your truck.
We only carry the highest quality products, so you can be sure that your new hydraulic pump will provide years of dependable service. But, if you change your mind after receiving your order, don't worry, you can return it, and your money will be refunded. We invite you to click "here" to learn more about our return policy.
But we're so confident in our products that each one of them comes with a one-year warranty to prove it. Do not risk compromising the rest of the hydraulic system elements of your TCM forklift, contact our staff through chat, or, if you prefer, you can call us (1.800.210.8170) and ask for the hydraulic pump you need. We are one of the most active forklift parts distributors nowadays, so place your order today; we assure you that you will not regret it.
We invite you to check out our selection of other spare parts for TCM forklift trucks that have been popular with our customers.
Hydraulic pumps are important for the correct operation of TCM forklift models. These pumps use hydraulic power to help lift heavy loads quickly and efficiently. If the pump fails, it affects the TCM forklift's ability to handle its loads. That is why it is important to know how to detect its failures in time to take either corrective actions or replace them directly before the problems escalate. If you need a new hydraulic pump for your TCM lift truck, remember that Lift Parts Warehouse has you covered; our pumps will keep your forklift running at peak performance for years to come.
#108 - 209 Glen Cove Rd,
Carle Place,
NY, USA
11514
$$-$$$$$
1.800.210.8170
4.7
4512
5
